Specifications

Chapter 2: Overview
2 – 2
Notes The following are the major components of this system:
■ Stanley ID Express Stations™
◆ Kiosk Stations
◆ Desktop Stations
■ B.A.S.I.S.® ET605 or higher
■ Stanley ID Express Station™ server software
■ Web server software
■ Magnetic stripe cards
■ B.A.S.I.S. offline locks
Setup overview
In the next chapter you will find complete step-by-step
instructions on the first-time configuration of a Stanley ID
Express Station™ System. Listed here are the major steps of
that process and cross-references where you can find each
corresponding task.
Task 1 Install all server software components. This task begins on
page 3-2.
■ Make sure that the B.A.S.I.S.® software is installed and
that a database is running, see page 3-2.
■ Confirm that the server has Internet Information Services
(IIS) installed and running, see page 3-3.
■ Confirm that the .NET Framework 1.1 is installed, see
page 3-3.
■ Install the Stanley ID Express Station™ server software,
see page 3-4.
Task 2 Set up the Server Configuration Utility. This task begins on
page 3-4.
■ Connect to the B.A.S.I.S.® database, see page 3-5.
■ Set up the Identification and Verification fields,
see page 3-7.
■ Define the network connections to the Stanley ID Express
Station™ kiosks and desktop stations, see page 3-10.
Task 3 Set up all kiosk and desktop station characteristics. This task
begins on
page 3-12.
■ Set up kiosk and desktop station graphics, see page 3-12.
■ Set up kiosk and desktop station behaviors, see page 3-14.
■ Set up kiosk and desktop station text messages, see
page 3-16.