Product Card

TECHNICAL DATA SHEET
FIX8 TRANSLUCENT
Note: The contents contained in this documentation are the result of our experiments and our experienceand have been submitted in good faith. Because of the
diversity of the materials and substrates and the real number of possible applications which are out of our control we cannot accept any responsibility for the
results obtained. In every case it is recommended to carry out preliminary experiments and compatibility tests.
Fixtech Pty Ltd. PO Box 568, Southport, Qld 4215. Tel: [phone]. Fax: [phone]
Email: [e-mail] Web: www.fixtech.com.au
Revision: 6/2016
Application:
Method: Manual or pneumatic caulking gun
Application temperature: +4°C to 40°C
Tooling: Mild diluted soapy solution before skin
formation
Joint Dimensions:
Minimal Width: 5mm
Maximum Width: 30mm
Minimum Depth: 5mm
Recommendation: width of joint = 2 x depth
Page 2 of 2
Health- and Safety Recommendation:
Apply the usual industrial hygiene. Wear gloves .
Safety Glasses. Volitile compound released
during curing, ensure adequate ventilation
Remarks:
• Fix8 Translucent can not be overpainted
• Fix8 Translucent is chemically neutral
(pH=7)
• Fix8 Translucent can be applied to a wide
variety of substrates. Due to the fact that the
specific properties of substrates will differ
from manufacturer to manufacturer we
strongly recommend compatibility tests.