CONTENTS SAFETY INFORMATION Thank you for purchasing this product. Please read this manual carefully before operating and reserve it for future reference. PRECAUTIONS • Use only in a 12-volt DC negative-ground electrical system. • W hen replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating may cause serious damage to the unit. • DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
PANEL CONTROLS Power on : Press any button on the panel except to turn on the unit. 20 19 18 1 ST/LOU LOC 2 17 16 3 4 5 6 7 8 9 10 11 13 14 15 12 1. - Power on - Mute - Press more than 2 seconds to power off. 2. - Press to pop out/push back the knob. - Rotate the knob to adjust volume level. 3. - P ress to select VOL/BAS/TRE/BAL/ FAD, rotate the knob to adjust level. - Hold it to access system menu. 4.
OTHER INSTRUCTIONS Press the button to open the panel. 1 2 3 4 5 1. Disc eject 2. Reset hole Note: Pressing the RESET hole will erase the clock setting and stored stations. 3. Panel status indicator Lights up when you flip the panel down; Twinkles when you remove the panel. 4. Disc slot, insert the disc. 5.
REMOTE CONTROL Operating range Point the remote control unit to the remote sensor when you operate with it. The remote control can operate within a distance of 3~5m. Remote Sensor 1. 2. 3. 4. - Power on/off - Volume - Mute - P ress to select VOL/BAS/TRE/BAL/FAD, use volume button to adjust level. - Press and hold it to enter Menu mode. 5. - Loudness 6. - FM stereo/mono 7.
BUTTON TIPS USB/SD/MMC MP3 PLAYBACK Radio 1. Loading SD/MMC Card Press button to flip down the panel, insert t h e S D / M M C c a r d into the slot, with the front side at left. The unit will play the music automatically. 2. Take out SD/MMC Card Press SRC button and switch to non CARD mode, open the panel, slightly press the card, take out the card when it was popped out. 3.
MP3 PLAYBACK While playing MP3 disc/USB/SD/MMCMP3 MUSIC, the folder/file name and ID3 TAG (Song title, Album and Artist) can scroll entirely across the LCD. Press the button BAND to show ID3 information: Elapsed playing time & Track number -> Folder name & number -> File name & number -> Song title -> Album title -> Artist name 5. Repeat above steps to enter the hundreds and thousands digit, if necessary.
MP3 OVERVIEW Note on MP3 “MP3” technology (mpeg audio layer3) reduces the digital data of an audio CD significantly while maintaining CD-like sound quality. • MP3 is a music compression technology, MP3 (mpeg audio layer 3) reduces the digital data of an audio CD significantly while maintaining CD-like sound quality. • This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs. • The unit can read MP3 files written in the format compliant with ISO 9660.
MENU FUNCTION Press MENU button more than 2 seconds to enter menu mode, then each press changes the mode as follows: SEEK 1/2 mode Rotate the knob to choose DSP sound effect: POP -> FLAT -> CLASSIC -> ROCK -> OFF Rotate the knob to choose radio seek mode 1 or 2. SEEK 1: Searching station will stop when the next station is received. SEEK 2: Searching station will stop when |<< or >>| button is released and next station is received.
ELECTRICAL CONNECTIONS INSTALLATION GUIDE Wiring Diagram Installation Procedures First complete the electrical connections, and check for correctness. Reset When the installation and connections are completed, be sure to press the RESET with a ball-point pen, etc. Note: Press the RESET button will erase the clock and stored stations.
INSTALLATION GUIDE ANTI-THEFT Install the unit Important: Remove the two screws on the top of the unit before installation. Otherwise, the player will not work. Installing the panel • • old the panel and ensure the panel faces H dwonward, and at an angle set one side of the panel in the panel bracket. Press the other side of the panel until it locks. Press the top of panel until it locks. 1 2 Mounting bolt rubber cushion. Remove the two screws.
TROUBLESHOOTING If you suspect something is wrong, immediately switch power off. Do not use the unit in abnormal condition, for example without sound, or with smoke or foul smell, can cause fire or electric shock. Immediately stop using it and call the store where you purchased it. Never try to repair the unit yourself because it is dangerous to do so. General No power or no sound. Radio Much noise in broadcast. Preset station lost. Car’s engine switch is not on. Cable is not correctly connected.
SPECIFICATIONS General Power supply: Maximum power output: Continuous power output: Suitable speaker impedance: Pre-Amp output voltage: Fuse: Dimensions(WxHxD): Weight: Aux-in: Sub-out: Disc Player System: Frequency response: Signal/noise ratio: Total harmonic distortion: Wow and flutter: Channel separation: 12V DC (11V-16V) Test voltage 14.4V, negative ground 50Wx4 channels 20Wx4 channels (4 ,10% T.H.D.) 4-8 ohm 4.0V (CD play mode: 1KHz, 0 dB, 10 K load) 15A 178x50x166mm 1.64kg ≥300mV 4.
PN: 127075002347
