Users Manual

24

BarcodeScanner
Totestthebarcodescanner,selectthebarcodetest,pointthescanneratabarcode(orQRcode),and
presstheSCANbuttononthescreenorpressthephysicalscanbuttononthehandleofthetablet.
Systemwillquicklyscananddisplaythebarcodeinformationonscreen.
Pressthe
buttonagaintoreadthebarcodeagain.Thedisplayedinfowillrefreshanddisplaythenew
barcodeinformation.

Pleaseaimthelaseratthecenterofbarcode.Donotplacethescannertoofarfrombarcode.
Barcodescanneruseslasertechnology,donotpointittowardanyone’seyes.


Buttonconfiguration
Buttonconfiguration can program the F1 and F2 buttons on your tablet. Selectthebuttonyouwant
toprogram,choosethedesiredfunctionandpresstheSAVEbuttontosavesettings,oryoucanselect
canceltodiscardthechanges.
Ifyouwanttoprogramthebuttonstoafunctionnotonthelist,pleasecontactyoursupplierforfurther
instructions.

