Users Manual

18
UsingtheFingerPrintReader
This device may include an internal Finger Print Reader module to identify a person's fingerprint for
securitypurposes.ItslocationisshowninproductlayoutinChapter2(Position1).Formoredetails,see
TechnicalSpecificationsinAppendixA.

• Placeyourfingeronthescanner.Pleasefollowtheinstructionsin
thespecificsoftwareforyour
applicationtousefingerprintreaderfunctionproperly.

Foroptimalperformance,boththescanningsurfaceandthefingershouldbecleananddry.Cleanthe
scanningsurfacewhenneeded.


Usersmustplacethefingerinthefingerprintreaderarea,otherwisetheinternalReadermodulemaynot
receivethesignalfromthefinger.


IfyoucannotgettheFingerPrintreaderfunctionworkproperly,cleanthereaderareaandtryagain.ifstill
notworking,pleasecontactyoursupplierfor
instruction.

• IfyouwanttocheckwhethertheFingerprintreaderhardwareisworkingproperly,youmayuse
eControllerapptotest.SeeChapter6:eControllerAppanditsApplications.