User's Manual

EXO Visual Inc [phone]
www.exovisual.com
6
3.1.1.2.1.3 Add New. Name the program, then select target device from the dropdown list.
Target devices are the ezPoster models. Once target device is selected, its resolution
will be shown in the Width (xxx) Height(xxx) section. By default, the content will be
applied to 1 ezPoster. Select more than 1 ezPoster wide from the width dropdown
list to apply the program to a wider screen when needed. Click “+”and follow
software guide to load picture/video from your computer. All programs uploaded
will be saved in the software under the programs list.
For more instructions, see below 3.1.5.1.2 “ Add New” program
3.1.1.3 Settings. Select Language from the Settings section
3.1.1.4 Tools.
3.1.1.4.1 Create Network Setting USB Drive: Conveniently copy a network setting to multiple
ezPosters with a thumb drive with data created from this function.
Plug an USB Drive onto the computer, click to enter Create Network Setting USB Drive. The
Following window will pop up. Input the target network information, then click Create. The
network setting data will be stored in the USB drive. Plugging the USB drive to any ezPoster
will automatically set the ezPoster’s network to the same network settings created in the
USB Drive.