User's Manual

EXO Visual Inc [phone]
www.exovisual.com
3
1.3 With wall bracket
Secure the wall bracket on the wall
Secure the bolts on the device
Hang the device onto the wall bracket
After setting up the device
Plug the power cable. Switch on the power button
Power indicator light will turn on once power is on
2. Connecting to the ezPoster
2.1 Connect with USB cable
Use the included USB Type A to Type B cable to connect the computer to the device, the device will show up in
the software’s device list.
This method will always work, use this method if you forget the WiFi password or cannot connect to the
ezPoster with other methods.
2.2 Connect through the Built-in WiFi Access Point
The ezPoster has built-in WiFi and it’s turned on by default. In this mode, the ezPoster works as a Wireless
router, computers or smart phones can be connected to it through this WiFi.
The default WiFi SSID is the device’s serial number, the default password is 123456789. They can be changed
in the Windows/Mac software.
Note: The WiFi Access Point may be not visible if the network mode is not set to WiFi Hostspot mode. To
change it, use the USB cable method to connect to the device and change the network setting in the
Windows/Mac software (See software instruction Network setting section)
Connecting to WiFi AP on Windows Connecting to WiFi AP on iOS