User's Manual

EXO Visual Inc [phone]
www.exovisual.com
9
To create a new program, click “Add New” button, a “New Program” window will popup
Name the program. Default program name will be “Program 1/2/3..”, then select target device
from the dropdown list. Target device should be the ezPoster model. Once target device is
selected, its resolution will be shown in the Width (xxx) Height(xxx) section.
By default, the new program will be applied to 1 ezPoster. If the content is to be displayed on
multiple cascaded devices, select the number from the width dropdown list representing the
total pixels of the devices. Click “+”and follow software guide to load picture/video from your
computer.
To delete an image or video from the list, select the item and click the button “-“
When multiple image or video are selected, they will be played sequentially.
“Save and Upload”: to save the program to the software on this computer and upload the
program to the ezPoster immediately.
“Save”: to save the program in the software on this computer, the program will go into the
program list here. You could select this program to upload to the ezPoster later when
needed.