Owner manual

• ForIndoorandSubmersibleUseOnly
• ForFreshWaterUseonly
Readinstructionsthoroughlypriortoinstallationandoperation
INSTRUCTIONSPERTAININGTOARISKOFFIRE,ELECTRIC
SHOCK,ORINJURYTOPERSONS.

IMPORTANTSAFETY
INSTRUCTIONS
WARNING: To guard against injury, basic safety precautions should
be observed when handling the pump, including the following:
1. READANDFOLLOWALLSAFETYINSTRUCTIONS
and all important notices on the appliance before using. Failure
to do so may result in damage to unit.
2. DANGER- To avoid possible electric shock, special care should
be taken since water is employed in the use of this equipment.
For each of the following situations, do not attempt repairs
yourself; return the appliance to an authorized service facility for
service or discard the appliance.
 A. If the pump shows any sign of abnormal water leakage,
immediately unplug it from the power source.
 B. Do not operate any appliance if it has a damaged cord or
plug, or if it is malfunctioning or if it is dropped or damaged
in any manner. The power cord of this appliance cannot be
replaced; if the cord is damaged, the appliance should be
discarded. Never cut the cord.
 C. To avoid the possibility of the appliance plug or electrical
socket getting wet, position the unit to one side of a wall
mounted socket to prevent water from dripping onto the socket
or plug. A “drip-loop” should be arranged. The “drip-loop” is that
part of the cord below the level of the socket or the connector if
an extension cord is used, to
prevent water from traveling
along the cord and coming
into contact with the socket.
If the plug or socket does
get wet, DO NOT unplug the
cord. Disconnect the fuse or
circuit breaker that supplies
power to the appliance.
Then unplug and examine
REPTI FLO
cIRcuLATION PumP
Instruction Manual
ENGLISHFRANÇAISDEUTSCHESPAÑOLITALIANONEDERLANDS
drip-loop