Owner manual

Maintenance
Figure25
1.Footlever3.Transportlock
2.Cutofheightpin
6.Inserttheheightadjustmentpinintothe3inch
(7.6cm)cuttingheightlocation.
7.Releasethetransportlockandallowthedeckto
lowertothecuttingheight.
8.Raisethedischargedeector.
9.Onbothsidesofthedeck,measurefromthe
levelsurfacetothefronttipoftheblade.The
measurementshouldread3inches(7.6mm).
Note:Inmostconditions,thebackbladetip
shouldbeadjusted1/4inch(6.4mm)higherthan
thefront.
Figure26
1.31/4inches(8.3cm)5.Levelsurface
2.Backbladetip
6.Rearofmachine
3.Frontbladetip
7.Frontofmachine
4.3inches(7.6cm)
10.Loosenthejamnutsonthetopofeachdeck
link.Finetunetheadjusteronthefrontdecklift
assemblybyturningittoget3inch(7.6mm)
height(seeFigure27).
Toincreasetheheight,turntheadjusterclockwise;
todecrease,turncounterclockwise.
Figure27
1.Adjusterlink3.Adjuster
2.Jamnut
11.Thebacktipofthebladeshouldmeasure3
1/4inches(8.3cm).Finetunerearadjustersas
required.
12.Re-measureuntilallfoursidesarethecorrect
height.Tightenallthejamnutsonthedecklift
armassemblies.
13.Lowerdischargedeector.
14.Ifthefourdecklinksdonothaveenough
adjustmenttoachieveaccuratecutheightwiththe
desiredrake,thesinglepointadjustmentcanbe
utilizedtogainmoreadjustment(seeFigure28).
37