Owner's manual

Operation
Figure18
Forcuttingheightsabove3.5inches(90mm)usethe
bottomhole.Therollerswillstillbeeffectiveagainst
scalping.
1.Anti-scalproller
mountingbracket
2.Cuttingheight
ForMaximumDeckFlotation,placetherollers
oneholepositionlower.Rollersshouldmaintain
1/4inch(6.4mm)clearancetotheground.Do
Notadjusttherollerstosupportthedeck.
7.Besurethewhizlocknutsareinstalledwiththe
springdiscwasherbetweentheheadofthenut
andthemountingbracket.
Note:Thefootoperateddeckliftlevercanbe
usedtomomentarilyliftthedecktoclearobjects.
BesurethatPTOisdisengaged.
8.Torquethe3/8–16whizlocknutto30-35ft-lb
(41-47N-m)(
Figure19).
9.Torquethe3/8nylocnutto30–35ft-lb(41-47
N-m).
Figure19
1.Springdiscwasher
(conetowardsnut)
3.3/8nyloc-torqueto30-35
ft-lb(41-47N-m)
2.Frontrightanti-scalp
bracketshown
4.3/8-16whizlocknut
torqueto30-35ft-lb
(41-47N-m)
Transporting
TransportingaUnit
Useaheavy-dutytrailerortrucktotransportthe
machine.Lockbrakeandblockwheels.Securely
fastenthemachinetothetrailerortruckwithstraps,
chains,cable,orropes.Besurethatthetrailerortruck
hasallnecessarylightingandmarkingasrequiredby
law .Secureatrailerwithasafetychain.
CAUTION
Thisunitdoesnothaveproperturnsignals,
lights,reectivemarkings,oraslowmoving
vehicleemblem.Drivingonastreetorroadway
withoutsuchequipmentisdangerousand
canleadtoaccidentscausingpersonalinjury.
Drivingonastreetorroadwaywithoutsuch
equipmentmayalsobeaviolationofStatelaws
andtheoperatormaybesubjecttotrafctickets
and/ornes.
DoNotdriveaunitonapublicstreetorroadway.
27