Mfg. Co. Inc. Utility Vehicle User Manual

Maintenance
LubricateGreaseFittings
Note:Seechartforserviceintervals.
1.Stopengine,waitforallmovingpartstostop,and
removekey.Engageparkingbrake.
2.LubricatettingswithNGLIgrade#2
multi-purposegungrease.
Refertothefollowingchartforttinglocations
andlubricationschedule.
LubricationChart
Fitting
Locations
Initial
Pumps
Numberof
Places
Service
Interval
1.Idler
Bushings
1–21
25Hours
CheckConditionofBelt
ServiceInterval:Every50hours
AllUnits
1.Stopengine,waitforallmovingpartstostop,and
removekey.Engageparkingbrake.
2.Inspectthebeltfordamageorwear.Replacebelt
withoneofthefollowing:
Deck
PartNo.
52inch–All
1–653438
60inchLazerZ,XS,XP
SN599,999andLowerand
AllLazerAS
103-0866
72inchAllSN599,999
andLower
103-0867
60inchTriton
109-1242
66inchTriton
103-0867
72inchTriton
109-1244
For52inchUnitsOnly-BeltReplacement
Procedure:
1.Removetheblowerfromthedeck.
2.Removethebeltguideontheblower(see
Figure9).
Figure9
ViewFromT opofBlower
1.Springloadedidler
4.Beltguide
2.Impellersheave
5.Decksheave(reference)
3.Fixedidler
3.Removetheoldbelt.
4.Installthenewbeltontotheblowerassemblyas
showninFigure9.
5.Reinstallthebeltguideremovedinstep2.
6.Reinstalltheblowerontothedeck.
For52inchUnitsOnly-InspectBeltPositionon
theIdlerArm:
Theidlerarmmaybecomebentduringuseor
transport.Abentidlerarmcouldcausethebeltto
jumpoffoftheidlerandbedamaged.
1.Makesurethebeltcoverisinstalledandrunthe
blowerforonetotwominutes.
2.Shutoffthedeckdrive,stopengine,wait
forallmovingpartstostopandremovekey.
Engageparkingbrake.Removethebeltcover
andchecktomakesurethatthebeltisridingnear
thecenteroftheatidlerontheidlerarm.
3.Ifthebeltisnotridingnearthecenterofthe
idler,removetheblower,andbendtheidlerarm
slightly.
4.Reinstalltheblowerandbeltcoverandrepeat
steps1through3untilthebeltispositionednear
thecenteroftheidler.
19