User Manual

Sales x Service x Recycling 888.563.6300 in the USA 800.268.2698 in Canada 15
CHARGER MENUS
Users can access various menus of the charger to view charge history, charger lifetime operational
history, charger settings, charger model and serial number as well as activate a recovery cycle for a
sulfated battery.
The charger menus can be accessed when the charger is idle, i.e. when the “Connect Battery” or the
“Push Start to Begin Cycle” screens are displayed. Pushing the function key “F” will display the
charger “Main Menu” while pushing the up/down (q/r) keys allows scrolling between the various menus
of the charger.
I. Charge Cycle History
1. With the “Connect Battery” or the “Push Start to Begin Cycle” screens are displayed,
push the function key “F”. The “Charge History” menu will first appear.
M A I N M E N U :
C H A R G E H I S T O R Y
E X I T E N T E R
Pressing the “EXIT” key will exit the charger menus while pressing the “ENTER” key will access
the selected menu.
2. Push the ENTER key to access the charge cycle history. The charger can hold up to 100
charge cycles which can be displayed (Note that the first cycle will be cycle 0 and the last
will be cycle 99). The last charge cycle is displayed first. Note that the charger will only
save the last 100 charge cycles.
C H # 9 9 0 7 / 1 9 / 0 7 0 4 : 2 0
V O L T : 5 8 . 6 H R S : 0 3 : 2 1
T E M P : 9 8 F A H R S : 5 6 2
The above screen will display the following:
CH#XX: Charge cycle number
01/01/05: Start date of the charge cycle
04:20: Start time of charge cycle
VOLT: Battery end of charge voltage
HRS: Duration of charge cycle
TEMP: Maximum battery temperature recorded
AHRS: Amp-hours returned