Instructions / Assembly

Spinner x4

Bottom Pole

Stake Base Stake Support

Middle Pole

Top Pole

Step 1:

Attach spinner (B) to top pole (A) by inserting it

through the opening.

Step 2:

Attach nut (C) to spinner (B) (result of step 1) by

iscrewing it to the right until it is firmly tightened.

Step 3:

Attach spinner (B) to top pole (A) (result of step 2)

by inserting it through the opening.

Step 4:

Attach nut (C) to spinner (B) (result of step 3) by

screwing it to the right until it is firmly tightened.

Nut





73988-RS

PAGE 1
73988-RS Top Pole Spinner x4 Bottom Pole Stake Base Step 1: Step 2: Step 3: Step 4: Attach spinner (B) to top pole (A) by inserting it through the opening. Attach spinner (B) to top pole (A) (result of step 2) by inserting it through the opening. Nut Middle Pole Stake Support Attach nut (C) to spinner (B) (result of step 1) by iscrewing it to the right until it is firmly tightened.
PAGE 2
Lay assembly down for the following steps: Step 5: Step 6: Step 7: Step 8: Step 9: Step 10: Attach middle pole (D) to top pole (A) (result of step 4) by aligning hole on t-pole with button on middle pole until it clicks in place. Attach nut (C) to spinner (B) (result of step 6) by screwing it to the right until it is firmly tightened. Attach nut (C) to spinner (B) (result of step 8) by screwing it to the right until it is firmly tightened.
PAGE 3
Step 11: Attach stake support (G) to stake base (F) by inserting it through opening. Step 12: Attach stake base (F) to bottom pole (E) by aligning hole of bottom pole to button of stake base until it clicks in place. When everythjng is assembled, insert stake base firmly into the ground. For best results, install on flat ground and ensure that the stake is 90 degrees vertical to the ground. FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY. © 2022 Exhart - Westlake Village, CA 91362.