Instructions / Assembly

Step 1: Attach nut bolt (A) to flower (B) by

sliding nut bolt into flower.

Step 2: Attach nut bolt (A) ( the result of step 1)

to branch pole (C) by turning it to the right until

it is firmly tightened. Note: Use allen wrench (F)

to hold nut bolt in place.

Flower (2) Branch Pole

Wing Nut

Step 3: Repeat step 1 and 2 to attach the

other flower to branch pole (C).

Lay Assembly on the ground for the following

step.

Step 4: Attach branch pole (C) to stake base (D)

by sliding branch pole into stake base. Then

secure the nut wing (E) by turning it to the right

until it is firmly tightened.

Allen Wrench

Nut Bolt (2)

Stake Base

When everything is assembled, insert stake base firmly into the ground. For best results, install on flat

ground and ensure that the stake is 90 degrees vertical to the ground.

Kinetic Garden Stake

Assembly Instructions

FOR DECORATIVE USE IN THE GARDEN. NOT TO BE GIVEN TO CHILDREN AS TOY.

For help please call 1-(800) 775-5503

www.exhart.com

PAGE 1
Kinetic Garden Stake Assembly Instructions Nut Bolt (2) Stake Base Step 1: Attach nut bolt (A) to flower (B) by sliding nut bolt into flower. Step 3: Repeat step 1 and 2 to attach the other flower to branch pole (C). Flower (2) Wing Nut Branch Pole Allen Wrench Step 2: Attach nut bolt (A) ( the result of step 1) to branch pole (C) by turning it to the right until it is firmly tightened. Note: Use allen wrench (F) to hold nut bolt in place. Lay Assembly on the ground for the following step.