User Guide MaxTester Series
Copyright © 2013–2014 EXFO Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, be it electronically, mechanically, or by any other means such as photocopying, recording or otherwise, without the prior written permission of EXFO Inc. (EXFO). Information provided by EXFO is believed to be accurate and reliable.
End-User License Agreement You have acquired a device ("DEVICE") that includes software licensed by EXFO Inc. (EXFO) from an affiliate of Microsoft Corporation ("MS"). Those installed software products of MS origin, as well as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by international intellectual property laws and treaties.
Internet Gaming/Update Features. If the SOFTWARE provides, and you choose to utilize, the Internet gaming or update features within the SOFTWARE, it is necessary to use certain computer system, hardware, and software information to implement the features. By using these features, you explicitly authorize MS, Microsoft Corporation and/or their designated agent to use this information solely to improve their products or to provide customized services or technologies to you.
Contents Contents Certification Information ..................................................................................................... viii 1 Introducing the MaxTester Series Unit ....................................................... 1 Main Features .........................................................................................................................1 LED Indicator Description ..................................................................................................
Contents 5 Working with Your Unit ..............................................................................63 Accessing the Online Documentation ...................................................................................63 Taking Screen Captures ........................................................................................................68 Setting Storage Parameters for Screen Captures ..................................................................70 Browsing the Web ............
Contents 12 Warranty ................................................................................................... 151 General Information ...........................................................................................................151 Liability ...............................................................................................................................152 Exclusions .......................................................................................................
Certification Information Certification Information North America Regulatory Statement This unit was certified by an agency approved in both Canada and the United States of America. It has been evaluated according to applicable North American approved standards for product safety for use in Canada and the United States. Electronic test and measurement equipment is exempt from FCC part 15, subpart B compliance in the United States of America and from ICES-003 compliance in Canada. However, EXFO Inc.
Certification Information If you purchased the Wi-Fi and Bluetooth option, your unit comes with an internal wireless module and antenna for which the following information applies: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
1 Introducing the MaxTester Series Unit Note: The appearance of your applications and tools may vary from the ones presented in this documentation, depending on the unit model and the options that you have purchased. Note: In this documentation, the words “tap” and “double-tap” (related to the use of a touchscreen) replace the words “click” and “double-click”. Main Features Your MaxTester Series unit includes the following: MaxTester Series Seven-inch color touchscreen Two USB 2.
Introducing the MaxTester Series Unit Main Features Front Touchscreen Battery LED Home button 2 On/Off button MaxTester Series
Introducing the MaxTester Series Unit Main Features Back Optional stand (to modify the position of the unit); not assembled on the unit at time of shipment Internal Wi-Fi and Bluetooth module (optional; sticker indicates that module is present) MaxTester Series 3
Introducing the MaxTester Series Unit Main Features Top DC input connector (for AC adapter/charger or car outlet adapter) Test instrument; some models only (refer to the user guide of the instrument for details) Stylus Built-in power meter (optional) VFL (optional) USB host ports RJ-45 port 4 MaxTester Series
Introducing the MaxTester Series Unit LED Indicator Description LED Indicator Description There is one LED indicator located on the front panel of your unit, providing you with information about the battery. This LED is identified by the symbol. The LED blinks when the battery is charging and its color changes according to the charge level of the battery, as explained in the table below. Color of the LED Meaning Green Battery level is between 25 % and 100 %.
Introducing the MaxTester Series Unit Function Buttons Description Function Buttons Description Your unit is equipped with function buttons which give you access to various tools at all times. The table below shows an overview of their purpose. Button Meaning Press the button to switch between the Home screen and the last used application. Note: If a keyboard is connected to your unit, or if you are controlling your unit remotely via VNC, you can also press CTRL + HOME.
Introducing the MaxTester Series Unit Power Sources Power Sources Your unit operates with the following power sources: AC adapter/charger (connected to standard power outlet—indoor use only). Compatible car outlet adapter available upon request. One lithium-polymer rechargeable battery (automatically takes over if you disconnect the unit from its external power source). Possible to switch from an external power source to battery power or vice versa without affecting operation.
Introducing the MaxTester Series Unit Conventions Conventions Before using the product described in this guide, you should understand the following conventions: WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not proceed unless you understand and meet the required conditions. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
2 Safety Information WARNING Do not install or terminate fibers while a light source is active. Never look directly into a live fiber and ensure that your eyes are protected at all times. WARNING The use of controls, adjustments and procedures, namely for operation and maintenance, other than those specified herein may result in hazardous radiation exposure or impair the protection provided by this unit.
Safety Information Other Safety Symbols on Your Unit Other Safety Symbols on Your Unit One or more of the following symbols may also appear on your unit. Symbol Meaning Direct current Alternating current Both direct and alternating current The unit is equipped with an earth (ground) terminal. The unit is equipped with a protective conductor terminal. The unit is equipped with a frame or chassis terminal.
Safety Information Laser Safety Information Laser Safety Information Units with Built-In VFL Your instrument is a Class 2 laser product in compliance with standards IEC 60825-1: 2007 and 21 CFR 1040.10, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Laser radiation is emitted at the output port. The following label(s) indicate that the product contains a Class 2 source: Units with test instrument Laser information of the test instrument.
Safety Information Electrical Safety Information Units without Built-In VFL If your unit is not equipped with a VFL, refer to the user guide of the test instrument (when applicable) for further laser safety details and instructions. Electrical Safety Information If you need to ensure that the unit is completely turned off, disconnect the power cable and remove the battery.
Safety Information Electrical Safety Information WARNING MaxTester Series Use the external power supply indoors only. Position the unit so that the air can circulate freely around it. Operation of any electrical instrument around flammable gases or fumes constitutes a major safety hazard. To avoid electrical shock, do not operate the unit if any part of the outer surface (covers, panels, etc.) is damaged.
Safety Information Electrical Safety Information WARNING Use only the listed and certified AC adapter/charger provided by EXFO with your unit. It provides reinforced insulation between primary and secondary, and is suitably rated for the country where the unit is sold. Use only accessories (such as the car outlet adapter, batteries, and fiber inspection probe) designed for your unit and approved by EXFO. The car outlet adapter contains a replaceable fuse.
Safety Information Electrical Safety Information Equipment Ratings Pollution degree 2 (unit connected to external power supply) 3 (unit operated from battery)d Overvoltage category Input powere I unit: 8 - 16 V; 2 A AC adapter: a. b. c. d. e. 100 - 240 V; 50/60 Hz; 0.7 A The battery will not recharge when the ambient temperature is below 5 °C (41 °F) or above 40 °C (104 °F). To optimize the performance of the battery, you should store the unit in a cool dry place.
3 Getting Started with Your Unit Installing and Using the Optional Stand Your unit has been designed to be positioned either vertically (with the screen facing you), or at an angle, using the optional stand (or the optional utility glove). Note: The stand ensures optimum stability to the unit during your tests. The stand is not assembled on your unit at time of shipment. You must install it when you receive your unit. To install the stand on your unit: 1.
Getting Started with Your Unit Installing and Using the Optional Stand 3. Align the side of the stand blockers with the side of the anchor eyelets, and then slide the blockers towards the eyelets until they stop. There should be no gap between the blockers and the eyelets. Stand blocker (shown in grey) Anchor eyelet 4. Using the provided hex key (“Allen” key), put the two top screws back in place (in the center of the blockers).
Getting Started with Your Unit Installing and Using the Optional Stand 5. Hold the stand by its sides, and then slightly widen it to be able to insert it into the blockers. Stand’s retaining clip 6. Release the stand as soon as it is properly inserted into the blockers. 7. If desired, secure the stand in its retaining clip by pushing it downwards.
Getting Started with Your Unit Installing and Using the Optional Stand To change the orientation of the unit using the stand: Pull out the stand.
Getting Started with Your Unit Turning On or Off the Unit Turning On or Off the Unit There are several ways to turn off the unit, including the following: Suspend: keeps the unit’s status information in memory (RAM). The next time you turn your unit on, you will quickly return to your work environment (running applications will still be running). This mode will take more battery power while the unit is off.
Getting Started with Your Unit Turning On or Off the Unit To turn on the unit: Press the On/Off button. The unit will beep once. Note: If you turn on the unit for the very first time, a configuration wizard will be displayed (see the corresponding section for more information). To enter the suspend mode: Press the On/Off button. The unit’s backlight will turn off. To exit the suspend mode and resume your work: Press the On/Off button.
Getting Started with Your Unit Configuring Your Unit At First Startup Configuring Your Unit At First Startup The first time you turn on the unit, a configuration wizard is displayed, enabling you to set all the regional and language settings such as the date, time, and operation language. If you modify the operation language, the wizard will prompt you to restart the unit (changes will be effective at next startup).
Getting Started with Your Unit Configuring Your Unit At First Startup To configure your unit at the first startup: 1. If it is not already done, turn on the unit (see Turning On or Off the Unit on page 21). 2. When the wizard is displayed, set the parameters according to your needs. See Selecting the Language of Operation on page 42. See Selecting the Layout of the On-Screen Keyboard on page 44. See Selecting the Global Language Format (Locale) on page 46. See Setting Date and Time Formats on page 48.
Getting Started with Your Unit Configuring Your Unit At First Startup 3. Continue with the remaining steps. See Accessing the Online Documentation on page 63. 4. When the configuration is complete, tap Finish. The Web browser will be launched automatically if you selected the check box.
Getting Started with Your Unit Navigating Through the Applications Navigating Through the Applications The central point on your unit is the Home screen. From there, you can access all the available applications and tools. Several applications can run simultaneously on your unit, but only one instance of a specific application at a time. You can switch to the last used application, or to the application of your choice easily, without having to close the applications each time.
Getting Started with Your Unit Navigating Through the Applications To switch from Home to the last used application (and vice versa): From the unit’s front panel, press the button. Note: If a keyboard is connected to your unit, or if you are controlling your unit remotely via VNC, you can also press CTRL + HOME. Note: You cannot switch back to the Configuration window using this button. If you wish to access the Configuration window again, tap the corresponding icon from the Home screen.
Getting Started with Your Unit Using the On-Screen (Virtual) Keyboard Using the On-Screen (Virtual) Keyboard Your unit is equipped with an on-screen keyboard that is displayed automatically when you select any location where data entry is possible. Note: You can close the keyboard temporarily with the button (located in the lower-right corner of the virtual keyboard). Next time you select a location where data entry is possible, the keyboard will be displayed again automatically.
Getting Started with Your Unit Installing or Upgrading the Applications Installing or Upgrading the Applications All the necessary applications have been preinstalled and configured at the factory. However, you may have to upgrade the applications when new versions become available. You can either install all the applications at a time using a single system image file, or install specific products using their individual upgrade files.
Getting Started with Your Unit Installing or Upgrading the Applications To install or upgrade the applications: 1. Using your computer, if necessary, retrieve the desired system image file or product upgrade files from the EXFO Web site. IMPORTANT If you want to upgrade specific products, ensure that you retrieve both the .bin and .xlm files. Otherwise, the application will not be able to upgrade the product. 2. From your computer, copy the installation files to the root of a USB memory key.
Getting Started with Your Unit Installing or Upgrading the Applications 7. Tap Software Updates. 8. Tap Check for Updates. Note: If no appropriate system image file or product upgrade files are found on the USB memory key, the application will prompt you to browse for a folder containing upgrade files. Note: If several versions of the system image or of the products are found, the application will install the most recent version.
Getting Started with Your Unit Installing or Upgrading the Applications 9. When the application prompts you to confirm the replacement of the current system image or products with new ones, tap Yes (system image) or Update (products) to start the process. 10. Read the end-user license agreement (EULA), and if you agree with the terms, tap Accept. Note: The acceptance of the license agreement is mandatory to be able to proceed with the upgrade. Note: The installation process may take a few minutes.
Getting Started with Your Unit Installing or Upgrading the Applications 11. When the application prompts you to restart the unit, tap OK. CAUTION It is normal that your unit restarts a few times during the upgrade process. To avoid causing irreparable damage to your unit, do not turn off your unit or force a power reset during the upgrade process. You will know that the upgrade is over when the configuration wizard is displayed. 12.
Getting Started with Your Unit Activating Software Options Activating Software Options The software options purchased at the same time as your unit have been activated for you already. However, if you purchase options afterwards, you will have to activate them yourself.
Getting Started with Your Unit Activating Software Options To activate the options for your unit: 1. From your computer, copy the key file to the root of a USB memory key. 2. Connect the USB memory key to one of the USB ports of your unit. 3. From the Home screen, tap Configuration. 4. Tap Software Options. 5. Tap Check for Updates. When the operation is successful, the option indicator will turn into a green check mark to confirm that the option is now active.
Getting Started with Your Unit Activating Software Options 6. When the application prompts you to restart the unit, tap OK to close the message. Note: At this point, if you have used a USB key to copy your key file, you can remove it as it is not required to use your new options. IMPORTANT Before restarting your unit, you may wish to browse through the running applications and save any data that you want to keep. 7. Restart your unit to complete the activation process: 7a.
Getting Started with Your Unit Using a Keyboard, Mouse or Other USB Devices Using a Keyboard, Mouse or Other USB Devices Your unit supports many USB devices. The table below lists the supported USB devices. Device Details Memory key For data transfer between your unit and a computer when you do not have access to a network. If you need information on how to transfer data using a memory key, see Managing Data on page 81.
Getting Started with Your Unit Using a Keyboard, Mouse or Other USB Devices You can connect several devices at the same time. IMPORTANT Your unit does not support USB printers. If you want to print documents, you must transfer your files to a computer (see Managing Data on page 81) that has access to a network printer. To use a USB device with your unit: Connect the USB device to any of the USB ports (located on top of the unit).
4 Setting Up Your Unit Adjusting Brightness To fit your work environment, you may adjust the LCD brightness. You can adjust brightness with a slider for more accuracy, or with shortcuts to go to the medium (50 %) or maximum brightness level quickly. Values are kept in memory even when you turn the unit off. If you want to set the delay after which the display is dimmed to save power, see Configuring the Power Management Options on page 54. To adjust the display brightness: 1.
Setting Up Your Unit Adjusting Brightness To quickly set the brightness to the medium or maximum level: 1. From the unit’s front panel, press the button for two seconds. Note: Once you have press the button, the brightness is set to the maximum value temporarily to ensure optimal readability. 2. From the shortcut toolbar, tap the button corresponding to the desired brightness level. The new brightness value is taken into account immediately.
Setting Up Your Unit Adjusting the Date, Time and Time Zone Adjusting the Date, Time and Time Zone The current date and time are displayed at the top of the Home screen. When saving results, the unit also saves the corresponding date and time. For information on how to modify the format in which the date and time are displayed, see Setting Date and Time Formats on page 48. To adjust the date, time or time zone: 1. From the Home screen, tap Configuration. 2. Tap Date and Time. 3.
Setting Up Your Unit Selecting the Language of Operation Selecting the Language of Operation You may display the user interface in one of the available languages (default is English). The value is kept in memory even when you turn the unit off. Note: Certain applications or tools may not be offered in all languages. Note: Changing the interface language has no effect on the keyboard layout.
Setting Up Your Unit Selecting the Language of Operation 3. From the Display language list, select the desired language. 4. When the application prompts you to restart the unit, tap OK to confirm. The new interface language will become available at the next startup.
Setting Up Your Unit Selecting the Layout of the On-Screen Keyboard Selecting the Layout of the On-Screen Keyboard You can select the layout of the on-screen keyboard. By default, the keyboard layout is set to QWERTY, but you can select any of the provided layouts. If you prefer, you can also hide the virtual keyboard so that it is not displayed when you select a location where data entry is possible.
Setting Up Your Unit Selecting the Layout of the On-Screen Keyboard To select the layout of the on-screen keyboard: 1. From the Home screen, tap Configuration. 2. Tap Region and Language. 3. From the Keyboard layout list, select the desired layout. Note: If you want to hide the keyboard, select None. If you want to display it again, select any other layout. Note: Switching from a given keyboard layout to a QWERTY (Pinyin) layout (or vice versa) requires that you restart your unit manually. 4.
Setting Up Your Unit Selecting the Global Language Format (Locale) Selecting the Global Language Format (Locale) By default, the dates (short and long), time and decimal separator are displayed in the formats associated with the global language format (locale). This means that by selecting the global language format, you can quickly define date, time and decimal separator formats.
Setting Up Your Unit Selecting the Global Language Format (Locale) 3. From the Format list, select the desired global language (locale). This will determine the date formats available for the dates, time and decimal separator. 4. From the unit’s front panel, press the Home screen. button to return to the The new values are taken into account immediately.
Setting Up Your Unit Setting Date and Time Formats Setting Date and Time Formats By default, the dates (short and long) and time are displayed in the formats associated with the global language format (locale). The time can be expressed with a 12- or a 24-hour notation. You can modify the way dates and time are displayed if the default values do not suit your needs. For information on how to adjust the date, the time, and the time zone, see Adjusting the Date, Time and Time Zone on page 41.
Setting Up Your Unit Setting the Decimal Separator Setting the Decimal Separator By default, the decimal separator used in numeric values corresponds to the one associated with the global language format (locale). However, you can select another decimal separator if you prefer. To set the decimal separator: 1. From the Home screen, tap Configuration. 2. Tap Region and Language. 3. From the Decimal separator list, select the desired separator. 4. From the unit’s front panel, press the Home screen.
Setting Up Your Unit Changing the Background Picture Changing the Background Picture The Home screen comes with a default background picture. However, you can change it by either selecting another image from those provided with your unit, or by adding one of your own images. For an optimum display, the size of the images must be 800 pixels x 480 pixels. The images that are smaller will be ignored (not visible on the list of possible background images).
Setting Up Your Unit Changing the Background Picture To add your own background pictures: 1. Transfer the images that you want to use to a USB memory key. 2. Connect the USB memory key to one of the USB ports on your unit. 3. From the Home screen, tap File Manager. 4. Tap the parent folder button once. 5. Localize your USB memory key (identified by “Removable Disk” or “Removable Disk 2”).
Setting Up Your Unit Changing the Background Picture 6. Double-tap the USB memory key identifier to access the key contents. 7. Copy the image that you need: 7a. Select the desired file. Note: If you want to copy all files at the same time, from the Edit menu, select Select All. 7b. From the Edit menu, select Copy. 8. Tap the parent folder button once to exit the USB memory key. 9. Double-tap DATA, then Home screen > Backgrounds. 10. From the Edit menu, select Paste. 11.
Setting Up Your Unit Changing the Background Picture To change the background picture: 1. From the Home screen, tap Configuration. 2. Tap Display. 3. Tap the image that you want to select as the new background image. The edge of the selected image will be highlighted and a check mark will appear, confirming your selection. 4. From the unit’s front panel, press the Home screen. button to return to the The background image is refreshed immediately.
Setting Up Your Unit Configuring the Power Management Options Configuring the Power Management Options When you do not use the unit for a while, the display may be dimmed to save power. You can also configure the unit to go into suspend (sleep) mode after the specified duration has expired (see Turning On or Off the Unit on page 21). For these actions, you can set idle durations for AC adapter/charger and battery operation. The values that you set are kept in memory even when you turn the unit off.
Setting Up Your Unit Configuring the Power Management Options To configure the power management options: 1. From the Home screen, tap Configuration. 2. Tap Power Options. 3. Modify the settings according to your needs. 4. From the unit’s front panel, press the Home screen. button to return to the The new values are taken into account immediately.
Setting Up Your Unit Configuring the Internet Options Configuring the Internet Options You can browse the Web directly from your unit, provided that you have access to an Internet connection and that the Internet options are configured properly. If you are not sure about how to configure your Internet access, contact your network administrator. To configure the Internet options: 1. From the Home screen, tap Configuration. 2. Tap Devices and Utilities. 3. Tap Internet Options. 4. Go to the Connection tab.
Setting Up Your Unit Recalibrating the Touchscreen Recalibrating the Touchscreen If you notice the touchscreen does not behave in the way it used to (for example, it is now difficult to select items) it probably needs a recalibration. The calibration method is performed using five points. You can stop the calibration process at any time, but the touchscreen will still need calibration. The parameters are taken into account only when the process is complete.
Setting Up Your Unit Recalibrating the Touchscreen 4. Using the stylus (or any blunt pointing device), simply press the center of the different targets that appear on the screen. Note: If you want to stop the calibration process, from the unit’s front panel, press the button. The application will close automatically after a few seconds. 5. When the calibration is complete, you will return to the Configuration window automatically. 6.
Setting Up Your Unit Selecting the Startup Application Selecting the Startup Application The first time you start your unit, the Home screen is displayed. However, you can configure your unit to automatically start in any of the available applications. You can also configure your unit to start services such as the VNC server (for remote control). For more information on remote control with VNC, see Accessing Your Unit Remotely on page 109.
Setting Up Your Unit Selecting the Startup Application 3. Select the application and/or the service you want to start automatically when you turn on your unit. Note: You can select only one application at a time. 4. From the unit’s front panel, press the Home screen. button to return to the Your selection will be taken into account next time you restart the unit.
Setting Up Your Unit Configuring the Network Settings Configuring the Network Settings You can configure the various network settings that your unit uses to connect to the network or to the Internet. By default, the IP address of the unit is assigned dynamically (automatically) by a DHCP server on your network. However, if you prefer, you can define your own static IP address. Note: If you are not sure on how to proceed or need more information about the configuration, contact your network administrator.
Setting Up Your Unit Configuring the Network Settings 4. Double-tap FEC1. 5. Go to the IP Address tab. 6. Modify the settings using the information provided by your network administrator. 7. Tap OK to confirm the changes. 8. Close the window to return to the Configuration window. 9. From the unit’s front panel, press the Home screen. button to return to the The new values are taken into account immediately.
5 Working with Your Unit Accessing the Online Documentation You can access the user documentation as well as the license agreements at all times from your unit. When you open user documentation from the Home screen (or the configuration wizard), the PDF files are displayed automatically in the PDF reader. If you want to print the user documentation, from a computer having access to the Internet, you can go to the My EXFO section of the EXFO Web site (www.exfo.com) and download it directly.
Working with Your Unit Accessing the Online Documentation 3. If you wish to access navigation tools, tap anywhere on the screen to display the tools icon.
Working with Your Unit Accessing the Online Documentation 4. Tap the icon to display the Tools and Bookmarks tabs. To close the PDF reader To close the Bookmarks and Tools tabs Display mode (Fit page width/view page in whole/full screen) Zoom Current page/ total number of pages. Tap to go to a specific page To access sections of the user documentation directly Note: As soon as you switch to full screen mode, only the content of the file remains displayed (all the other elements are hidden).
Working with Your Unit Accessing the Online Documentation To transfer the user documentation to a USB memory key: 1. Connect a USB memory key to one of the USB ports of the unit. 2. From the Home screen, tap File Manager. 3. In the Address bar, type \Program Files\Metrino\, and press ENTER. 4. Double-tap the folder corresponding to the application for which you want to retrieve the documentation. 5. Locate the desired PDF file. The English version is available directly at the root of the folder.
Working with Your Unit Accessing the Online Documentation 6. From the Edit menu, select Copy. 7. Tap the parent folder button several times until you can see your USB memory key (identified by “Removable Disk” or “Removable Disk 2”). 8. Double-tap the USB memory key identifier to access the key contents. 9. From the Edit menu, select Paste. 10. Disconnect your USB memory key.
Working with Your Unit Taking Screen Captures Taking Screen Captures You can take captures of what is displayed on your screen, directly from your unit. This could be useful for troubleshooting when you need another person to have a look at a specific configuration or problem. You could also use this tool for training purposes. For more information on how to modify the default file format and destination folder, see Setting Storage Parameters for Screen Captures on page 70.
Working with Your Unit Taking Screen Captures Examples: For a screen capture taken on August 20, 2013, the file name could be: Short Date Format Time Format File Name MM/dd/yy 12 hours IMG_08_20_13_4_23_10_PM.jpg yyyy-MM-dd 12 hours IMG_2013_08_20_4_23_10_PM.jpg yyyy-MM-dd 24 hours IMG_2013_08_20_16_23_10.jpg To take a screen capture: 1. From the unit’s front panel, press the 2. From the shortcut toolbar, tap the button for two seconds. button.
Working with Your Unit Setting Storage Parameters for Screen Captures Setting Storage Parameters for Screen Captures You can modify the file format of the screen captures as well as the destination folder, that is the folder to which the captures will be sent. By default, images are saved in .jpg format, but you can configure the application to save them in .png or .bmp format.
Working with Your Unit Setting Storage Parameters for Screen Captures To set the default image format: 1. From the Home screen, tap Configuration. 2. Tap Devices and Utilities. 3. Tap Screenshot Configuration. 4. Under Image format, select the option corresponding to the desired format. 5. Tap OK to confirm the changes and close the window.
Working with Your Unit Setting Storage Parameters for Screen Captures To modify the destination folder: 1. From the Home screen, tap Configuration. 2. Tap Devices and Utilities. 3. Tap Screenshot Configuration. 4. Under Destination folder, tap Browse.
Working with Your Unit Setting Storage Parameters for Screen Captures 5. From the Browse for Folder window, select the folder that you want to use to store the screen captures. 6. When your selection is made, tap OK. 7. Tap OK to confirm the changes and close the window.
Working with Your Unit Browsing the Web Browsing the Web You can browse the Web directly from your unit, provided that you have access to an Internet connection. If you need to modify the Internet options, see Configuring the Internet Options on page 56. To browse the Web: 1. From the Home screen, tap the Internet Explorer icon to open the browser.
Working with Your Unit Browsing the Web 2. Enter the desired Web address in the address bar and tap the ENTER key from the on-screen keyboard to start browsing. 3. Press the screen.
6 Using the Optional Built-In Power Meter and VFL You unit can be equipped with an optical power meter to measure absolute power (dBm or W) or insertion loss (dB). The power meter can detect modulated signals (1 kHz, 2 kHz, 270 Hz, and 330 Hz). Your unit can also include a visual fault locator (VFL) to inspect or identify fibers. For more information on how to use the power meter or the VFL, refer to the power meter online help.
7 Inspecting Fibers with a Probe The fiber inspection probe (FIP) is used to find dirty or damaged connectors by displaying an enlarged view of the connector surface. You can connect an FIP to your unit to view fiber ends. IMPORTANT Only the probes of the FIP-400B series are supported on your unit. Fiber inspections are made using the ConnectorMax2 application. For more information, refer to the ConnectorMax2 online help.
8 Managing Data You can copy, move, rename, delete files and folders directly on your unit. You can transfer files from your unit to a USB memory key or a computer. You can also transfer data from a storage device or a computer to your unit. Your unit is equipped with the following ports and devices for data transfer: MaxTester Series Two USB 2.
Managing Data Viewing Disk Space and Managing Files Viewing Disk Space and Managing Files To help you manage the data that is stored on your unit, you can easily view the remaining disk space. You can also copy, move, rename, delete files and folders directly on your unit. To view the free disk space on your unit (DATA partition): 1. From the Home screen, tap Configuration. 2. Tap System Information > Capacity. The free disk space is displayed under Data (\ Data) space used. 3.
Managing Data Transferring Data via Bluetooth Transferring Data via Bluetooth If your unit is equipped with the optional wireless module (internal), you can transfer data between your unit and a computer using the Bluetooth technology. By default, the Wi-Fi and Bluetooth module is enabled, but not connected to a network or a device. If you have disabled the module, you must enable it before trying to transfer data via Bluetooth (see Enabling or Disabling the Wi-Fi and Bluetooth Module on page 99).
Managing Data Transferring Data via Bluetooth Configuring the Computer To communicate via Bluetooth, your unit uses mobile device services, which means that Mobile Device Center (Windows Vista, Windows 7, and Windows 8), or ActiveSync (Windows XP) must be installed on your computer. You can download and install the required application from the Microsoft Web site: ActiveSync for Windows XP: http://www.microsoft.com/en-us/download/details.
Managing Data Transferring Data via Bluetooth Pairing Devices with Your Unit After the computer that you intend to use has been properly configured, you can pair (associate) it with your unit. Once a device has been paired successfully with your unit, it remains paired (that is, ready for data transfer) as long as you do not remove the pairing yourself.
Managing Data Transferring Data via Bluetooth The icon, displayed in the title bar, indicates the status of the Bluetooth connection. The following table shows the possibilities: Icon Meaning Grey The Wi-Fi and Bluetooth module is enabled, but no pairing and no choice of mobile service has been made. Blue At least one Bluetooth device has been paired successfully with your unit. Not visible Unit is not equipped with Wi-Fi and Bluetooth option.
Managing Data Transferring Data via Bluetooth IMPORTANT To avoid problems, always initiate the pairing from your unit (not from the Bluetooth devices). To pair devices with your unit: 1. On your unit, from the Home screen, tap Configuration. 2. Tap Devices and Utilities. 3. Tap Bluetooth Configuration. Note: The Bluetooth Configuration icon is only visible on units that support wireless communication, and that are equipped with the optional wireless module. 4.
Managing Data Transferring Data via Bluetooth 5. Tap Find Devices if you want to scan for all the Bluetooth devices that are available within your unit’s range. Note: If you do not scan for all the available devices, the application will either show you the list of paired devices, or an empty list if no pairing exist. 6. Tap the row corresponding to your computer. 7. Tap Connect.
Managing Data Transferring Data via Bluetooth 9. On the computer, when the application prompts you, click the Bluetooth icon (located on the taskbar) to display the wizard allowing you to add a Bluetooth device. 10. Follow the on-screen instructions. Enter the passkey that you wrote down earlier, or confirm the correspondence between the two passkeys. Note: On your unit, if necessary, tap Yes to close the passkey window.
Managing Data Transferring Data via Bluetooth 12. Select Windows Mobile, and then tap OK. The unit tries to establish communication with the computer. Mobile Device Center starts automatically (on the computer). 13. On your unit, tap Close to close the Bluetooth configuration window. You are now ready to start transferring files.
Managing Data Transferring Data via Bluetooth Transferring Data Once the communication is established between your unit and the computer, you can either transfer data using a file explorer or the file management feature of Mobile Device Center (both available from the computer). Note: On Windows 8, you cannot access the folders of your unit from a file explorer. You must use Mobile Device Center to transfer data. To transfer data from your unit to a computer with Mobile Device Center: 1.
Managing Data Transferring Data via Bluetooth 2. Click File Management. 3. Click Browse the contents of your device. 4. Double-click the drive that is identified with “\” to access the folders on your unit. Note: If you close Mobile Device Center, you may have to open it manually at next startup of the unit or when the unit returns from the suspend mode.
Managing Data Connecting to a Wireless Network Connecting to a Wireless Network If your unit is equipped with the optional wireless module (internal), you can connect to a wireless network and benefit from all resources that are available on this network. You can transfer data exactly as you would do from an Ethernet network. By default, both the Bluetooth and Wi-Fi module is enabled, but not connected to a network or a device.
Managing Data Connecting to a Wireless Network The following table shows the possibilities: Icon Meaning Entirely grey (in the list of networks) The wireless network is out of range. Partially or entirely green The wireless network is in range of your unit. The number of displayed waves in green reflects the quality of the signal. Not visible (in the title bar) Unit is not equipped with Wi-Fi and Bluetooth option. Wi-Fi and Bluetooth are not supported on this model.
Managing Data Connecting to a Wireless Network To connect to a wireless network: 1. If it is not already done, share all the required folders on your computer. If you are not sure on how to proceed, contact your network administrator. 2. On your unit, from the Home screen, tap Configuration. 3. Tap Devices and Utilities. 4. Tap Wi-Fi Configuration. Note: The Wi-Fi Configuration icon is only visible on units that support wireless communication, and that are equipped with the optional wireless module. 5.
Managing Data Connecting to a Wireless Network 6. Tap the row corresponding to the network that you want to use. Note: The list of wireless networks is refreshed automatically at regular intervals. 7. Tap Connect. 8. If the network is protected by a network key (password) enter it in the corresponding box and tap OK. Note: Since all networks are different, you may also need to configure other parameters before being able to transfer data via Wi-Fi.
Managing Data Connecting to a Wireless Network To define manual configurations: 1. If the network that you want to use requires a manual configuration, on your unit, from the Home screen, tap Configuration. 2. Tap Devices and Utilities. 3. Tap Wi-Fi Configuration. Note: The Wi-Fi Configuration icon is only visible on units that support wireless communication, and that are equipped with the optional wireless module. 4. Ensure that the Enable Wi-Fi and Bluetooth check box is selected.
Managing Data Connecting to a Wireless Network 5. Tap Advanced to access the configuration tool. The Wi-Fi Configuration window is closed automatically. 6. Set the parameters as needed. Note: Depending on the type of protocol that you select, you may have to use security certificates for authentication. For more information on the importation of such certificates in your unit, see Managing Security Certificates on page 102. 7. When the configuration is complete, tap OK to close the configuration window.
Managing Data Enabling or Disabling the Wi-Fi and Bluetooth Module Enabling or Disabling the Wi-Fi and Bluetooth Module By default, the Wi-Fi and Bluetooth module is enabled on units that are equipped with the corresponding option. However, if you do not intend to transfer files via Bluetooth or to work with a wireless network for a certain period of time, you may wish to disable the module to extend battery life. You may also wish to turn off wireless communication for a while (“airplane mode”).
Managing Data Enabling or Disabling the Wi-Fi and Bluetooth Module To enable or disable the Wi-Fi and Bluetooth module: 1. From the Home screen, tap Configuration. 2. Tap Devices and Utilities. 3. Tap Bluetooth Configuration or Wi-Fi Configuration. Note: The Bluetooth Configuration and Wi-Fi Configuration icons are only visible on models that support wireless communication, and that are equipped with the optional wireless module.
Managing Data Enabling or Disabling the Wi-Fi and Bluetooth Module 4. Select the Wireless and Bluetooth communication check box if you want to enable wireless communication, or clear it if you want to disable it. 5. Tap Close to return to the Configuration window. 6. From the unit’s front panel, press the Home screen. button to return to the The new selection is taken into account immediately.
Managing Data Managing Security Certificates Managing Security Certificates You can import, view, or delete the certificates and private keys that are used for server and user authentication directly from your unit. The security certificates that are required depend on your network configuration. Contact your network administrator for more information. To manage security certificates: 1. From the Home screen, tap Configuration. 2. Tap Devices and Utilities. 3. Tap Security Certificates. 4.
Managing Data Transferring Files with the Data Mover Application Transferring Files with the Data Mover Application You cannot print documents and images directly from your unit. You must use a USB memory key to transfer the files to a computer that has access to a printer. If you need more flexibility and a greater choice of report types, you can also transfer result files to a computer onto which applications such as EXFO FastReporter 2 are installed.
Managing Data Transferring Files with the Data Mover Application Each time you copy data, the application creates a folder on the storage device. This folder will contain the copied files and subfolders (original folder structure as well as folder and file names are kept). The application generates folder names as follows: [YEAR]-[MONTH]-[DAY]_[HOUR]-[MINUTE]-[SECOND] Example: For a copy operation requested on September 20, 2013, the folder name could be: 2013-09-20-13_23-01-45.
Managing Data Transferring Files with the Data Mover Application 3. Select or clear the check boxes to adjust the folder selection to your needs. 4. If necessary, under Destination media, select the desired USB storage device. 5. Tap Copy. The files will remain on your unit after the transfer. 6. When you have finished, tap MaxTester Series to exit the Data Mover application.
Managing Data Transferring Files with the Data Mover Application To manage the list of source folders: 1. From the Home screen, tap Data Mover. 2. Tap User Preferences.
Managing Data Transferring Files with the Data Mover Application 3. If you want to add your own folders to the list of source folders, proceed as follows: 3a. Tap Add a Folder. 3b. Select the desired folder, and then tap OK.
Managing Data Transferring Files with the Data Mover Application 4. If you want to remove folders from the list of source folders, proceed as follows: 4a. Select the folder that you want to remove. 4b. Tap Remove Folder. Note: The application will not prompt you to confirm the removal of the folder from the list. 5. When you have finished, tap Close. Your changes are reflected automatically. All the newly added folders are selected by default. 6. Tap 108 to exit the Data Mover application.
9 Accessing Your Unit Remotely You can access your unit remotely from a computer using the TightVNC Client application. The table below presents the characteristics of this application. Characteristic TightVNC Client Type of connection Not exclusive; several users can be connected to the unit at the same time (sharing the same session). Password-protected Yes; but not mandatory. For a more secure connection, you can define a password on the VNC Server from the VNC Server Properties window.
Accessing Your Unit Remotely The control of your unit with TightVNC requires the VNC Server (already installed on your unit) and the TightVNC Client Viewer (that you must install on your computer). The first time you start the VNC Server on your unit, you may want to define a connection password for increased security. This is not mandatory; you can also configure the VNC Server to allow connections without authentication.
Accessing Your Unit Remotely Configuring the VNC Server Configuring the VNC Server The VNC Server is already installed on your unit. By default, the server is configured to accept secured connections only. This means that you must configure a password before establishing a connection between a computer and your unit. However, you can modify the desired type of connection if you prefer not to be prompted for a password. You can also modify other connection settings to better suit your needs.
Accessing Your Unit Remotely Configuring the VNC Server To configure the VNC Server: 1. From the Home screen, tap VNC. 2. From the VNC toolbar, tap Server Configuration.
Accessing Your Unit Remotely Configuring the VNC Server 3. Select the option that best suits your needs. MaxTester Series If you do not want to be prompted for a password when you connect with TightVNC, select No Authentication. If you prefer to secure the connection with a password, select VNC Password Authentication.
Accessing Your Unit Remotely Configuring the VNC Server 4. If you selected the VNC Password Authentication option, define the password as follows: 4a. Tap the Configure button located next to the option. 4b. Type the desired password. 4c. Tap OK to keep the new password. 5. From the VNC Server Properties window, tap OK to confirm the changes. If you prefer to discard all the modifications that you made (including the password), tap the button.
Accessing Your Unit Remotely Installing the TightVNC Viewer on a Client Computer Installing the TightVNC Viewer on a Client Computer If the TightVNC Viewer is not already installed on your computer, you can download it from the Web for free. IMPORTANT EXFO does not provide licenses for TightVNC Viewer. Always ensure that you are entitled to install it on your computer. To install the TightVNC Viewer on your computer: 1. Open a Web browser and go to http://www.tightvnc.com/. 2.
Accessing Your Unit Remotely Connecting to Your Unit with TightVNC Connecting to Your Unit with TightVNC Once the TightVNC Viewer is installed on your computer, you are ready to access your unit remotely. To connect to your unit with TightVNC: 1. Connect both the computer and your unit to the same network and make sure they can “see” each other as network restrictions might prevent them from communicating.
Accessing Your Unit Remotely Connecting to Your Unit with TightVNC 3. On your unit, from the Home screen, tap VNC. 4. Write down the IP address. Note: It may take a few seconds before you can see the IP address. 5. If you have configured VNC Server to start automatically when you turn on your unit, go directly to step 7. Otherwise, the VNC toolbar, tap Start Server.
Accessing Your Unit Remotely Connecting to Your Unit with TightVNC 6. From the VNC toolbar, tap Start Server. Note: The icon appears in the upper right corner of the Home screen to indicate that the VNC Server is running, and that remote connections can be established with the unit. 7. From your computer, start the TightVNC Viewer. 8. In the Remote Host list, type the IP address of your unit that you wrote down at step 4.
Accessing Your Unit Remotely Configuring VNC Server to Start Automatically Configuring VNC Server to Start Automatically By default, the VNC Server is not started automatically when you turn on your unit. However, you can modify this setting. This is especially useful if you need to remotely connect to your unit without having the unit close at hand. If you want VNC Server to start automatically when you turn on your unit, see Selecting the Startup Application on page 59.
10 Maintenance To help ensure long, trouble-free operation: Always inspect fiber-optic connectors before using them and clean them if necessary. Keep the unit free of dust. Clean the unit casing and front panel with a cloth slightly dampened with water. Store unit at room temperature in a clean and dry area. Keep the unit out of direct sunlight. Avoid high humidity or significant temperature fluctuations. Avoid unnecessary shocks and vibrations.
Maintenance Cleaning Detector Ports Cleaning Detector Ports Regular cleaning of detectors will help maintain measurement accuracy. IMPORTANT Always cover detectors with protective caps when unit is not in use. To clean detector ports: 1. Remove the protective cap and adapter (FOA) from the detector. 2. If the detector is dusty, blow dry with compressed air. 3. Being careful not to touch the soft end of the swab, moisten a cleaning tip with only one drop of isopropyl alcohol.
Maintenance Cleaning VFL-Type Connectors Cleaning VFL-Type Connectors VFL-type connectors are fixed on your unit and can be cleaned using a mechanical cleaner. WARNING Verifying the surface of the connector with a fiber-optic microscope WHILE THE UNIT IS ACTIVE WILL result in permanent eye damage. To clean a connector using a mechanical cleaner: 1. Insert the mechanical into the optical adapter, and push the outer shell into the cleaner.
Maintenance Cleaning the Touchscreen of Your Unit Cleaning the Touchscreen of Your Unit Clean the touchscreen with a soft, non-abrasive cloth, such as one used for cleaning reading glasses, dampened with water. CAUTION Using anything else than water can damage the special coating of the touchscreen. Recharging the Battery The battery in your unit is a lithium-polymer battery. The charge status is shown in the upper right corner of the Home screen.
Maintenance Recharging the Battery IMPORTANT Batteries are not charged at the factory. You must fully charge the battery before using the unit for the first time. The battery is fully charged after a few hours or when the battery LED indicator stops flashing. The time required to charge batteries depends on various factors such as the ambient temperature. The battery will not recharge when the ambient temperature is below 5 °C (41 °F) or above 40 °C (104 °F).
Maintenance Replacing Batteries Replacing Batteries Your unit uses a lithium-polymer battery with built-in protection that has been especially designed for EXFO. For this reason, it is only possible to replace the battery with a battery designed for your MaxTester Series unit. WARNING To avoid damaging your unit, EXFO recommends that you send it to an authorized service center if it requires a battery replacement. However, you can purchase a new battery from EXFO.
Maintenance Installing or Removing the Power Meter and VFL Installing or Removing the Power Meter and VFL If your unit was not equipped with a power meter (or a power meter and a VFL) at time of your initial purchase, you can purchase one afterwards and install it yourself. You may also need to remove the power meter to send it to an authorized service center for recalibration.
Maintenance Installing or Removing the Power Meter and VFL CAUTION Electrostatic discharge (ESD) damage can cause complete or intermittent equipment failures. Always use an ESD-preventive wrist or ankle strap when handling the power meter. Ensure that the antistatic strap makes good skin contact and that the end of its wire is grounded properly. Always handle the power meter by the edges of its metal faceplate (where the detector port is located). Never touch the circuit board.
Maintenance Installing or Removing the Power Meter and VFL To install a power meter: 1. Press and hold the On/Off button a few seconds until the unit beeps once to put it in shutdown mode. 2. Disconnect the unit from its external power source. 3. Put on a wrist (or an ankle) antistatic strap and ensure that the end of its wire is grounded properly. 4. Place the unit vertically so that its front panel is facing you. 5. On the top panel of the unit, locate the protective cover that hides the power meter bay.
Maintenance Installing or Removing the Power Meter and VFL 8. By holding the power meter by its faceplate, position it so that the writings are right-side up. Writings 9. Carefully align the power meter with the corresponding bay. 10. Gently slide the power meter into the bay until its faceplate is flush with the edge of the bay. 11. Using a screwdriver, secure the power meter in place with all the screws that you have removed at step 6.
Maintenance Installing or Removing the Power Meter and VFL 12. Remove your antistatic strap. 13. Connect your unit to an external power source if desired. 14. If it is not already done, turn on your unit. 15. Start the power meter application to ensure that the instrument is working properly. Note: If the power meter is not detected, this could mean that it is not inserted properly in the unit. In this case, repeat the installation procedure. If the problem persists, contact EXFO.
Maintenance Installing or Removing the Power Meter and VFL 5. On the top panel of the unit, locate the power meter. 6. Using a screwdriver, remove the four screws of the power meter. Note: If you have a protective cover for the power meter bay, keep the screws close at hand. You will need them to secure the protective cover in place later. IMPORTANT Do not discard the screws. You will need them to secure the power meter in its bay when it is back from calibration.
Maintenance Installing or Removing the Power Meter and VFL 7. By holding the power meter by its faceplate, gently pull it out of the bay completely. 8. Place the power meter in an antistatic bag. 9. If you have a protective cover, proceed as follows: 9a. Carefully place the cover over the power meter bay. 9b. Using a screwdriver, secure the protective cover in place with all the screws that you have removed at step 6. 10. Remove your antistatic strap. 11.
Maintenance Recalibrating the Unit Recalibrating the Unit EXFO manufacturing and service center calibrations are based on the ISO/IEC 17025 standard (General Requirements for the Competence of Testing and Calibration Laboratories). This standard states that calibration documents must not contain a calibration interval and that the user is responsible for determining the re-calibration date according to the actual use of the instrument. The validity of specifications depends on operating conditions.
Maintenance Recycling and Disposal (Applies to European Union Only) To help you with calibration follow-up, EXFO provides a special calibration label that complies with the ISO/IEC 17025 standard and indicates the unit calibration date and provides space to indicate the due date.
11 Troubleshooting Solving Common Problems Problem Unit does not turn on. Cause Battery is discharged. Solution Charge the battery. Connect the unit to an external power supply using the AC adapter/charger (or the car outlet adapter). If the unit still does not turn on, press and hold down the power button for at least 12 seconds to force a hardware reset on the unit. Release the power button, and then restart your unit as usual. Unit is not connected to an external power supply.
Troubleshooting Solving Common Problems Problem Unit screen is dark. Cause Solution Unit’s backlight is set to minimum value. Modify brightness (see Adjusting Brightness on page 39). Battery is discharged and unit has shut down. Charge the battery. Connect the unit to an external power supply using the AC adapter/charger (or the car outlet adapter). External keyboard is not External keyboard has Disconnect the keyboard, and working. not been detected. then connect it again.
Troubleshooting Solving Common Problems Problem Cause Solution Screen characters are dim. Brightness is not set properly. Modify brightness (see Adjusting Brightness on page 39). Even though you have performed a screen calibration recently, the screen is no longer calibrated properly. The unit is no longer powered by the same power source (battery or AC) that was in use at the time of screen calibration. Changes in the power source require a new calibration.
Troubleshooting Solving Common Problems Problem Unit’s operating time is reduced. Batteries are not charging. Cause Solution Battery was not fully charged. Charge the battery. Battery is probably worn out. See Service and Repairs on page 153. Ambient temperature is too high or too low. Ensure that the temperature in the location where you charge the batteries is within the specifications.
Troubleshooting Solving Common Problems Problem Unit is not responding. MaxTester Series Cause Solution Restore your unit (see Restoring Your Unit to Normal Operation on page 142).
Troubleshooting Restoring Your Unit to Normal Operation Restoring Your Unit to Normal Operation If you ever encounter major problems with your MaxTester Series unit (for example, you cannot start it), you can revert your unit to its initial state (as it was when you purchased it). For current updates, use the Software Update tool. CAUTION Before starting the recovery operation, connect your unit to a power outlet using the provided AC adapter/charger.
Troubleshooting Restoring Your Unit to Normal Operation To navigate in the various windows using the unit’s buttons: Press the button to select an item. Repeat until the desired item is selected (highlighted). Press the button for two seconds to confirm the selection. To restore your unit to normal operation: 1. Turn off the unit. 2. Ensure that your unit will remain powered on during the operation by connecting it to a power outlet using the provided AC adapter/charger. 3.
Troubleshooting Restoring Your Unit to Normal Operation 4. Select Start Recovery Procedure and confirm your choice. 5. Select Start and confirm your choice to proceed with the recovery operation. The operation may take a few minutes. The unit will restart upon completion of the process.
Troubleshooting Contacting the Technical Support Group Contacting the Technical Support Group To obtain after-sales service or technical support for this product, contact EXFO at one of the following numbers. The Technical Support Group is available to take your calls from Monday to Friday, 8:00 a.m. to 7:00 p.m. (Eastern Time in North America). Technical Support Group 400 Godin Avenue Quebec (Quebec) G1M 2K2 CANADA 1 866 683-0155 (USA and Canada) Tel.: 1 418 683-5498 Fax: 1 418 683-9224 support@exfo.
Troubleshooting Viewing System Information Viewing System Information You can easily access important information such as serial numbers, or version numbers for kits and components directly from your unit. You can also find the contact information if you ever need to reach EXFO. Retrieving the Serial Numbers Your unit may display one or more serial numbers, depending on the test instruments that you have. To retrieve the serial numbers: 1. From the Home screen, tap Configuration. 2.
Troubleshooting Viewing System Information Retrieving the Component Versions You can view the system image version as well as the software version of the Home screen application that are installed on your unit. To retrieve the component versions: 1. From the Home screen, tap Configuration. 2. Tap System Information > About. The component versions are listed above the contact information. 3. From the unit’s front panel, press the Home screen.
Troubleshooting Viewing System Information Retrieving the Contact Information All the information necessary to contact EXFO is available from your unit. To retrieve the contact information: 1. From the Home screen, tap Configuration. 2. Tap System Information > About. The contact information is displayed. 3. From the unit’s front panel, press the Home screen.
Troubleshooting Transportation Transportation Maintain a temperature range within specifications when transporting the unit. Transportation damage can occur from improper handling. The following steps are recommended to minimize the possibility of damage: MaxTester Series Pack the unit in its original packing material when shipping. Avoid high humidity or large temperature fluctuations. Keep the unit out of direct sunlight. Avoid unnecessary shocks and vibrations.
12 Warranty General Information EXFO Inc. (EXFO) warrants this equipment against defects in material and workmanship for a period of one year from the date of original shipment. EXFO also warrants that this equipment will meet applicable specifications under normal use.
Warranty Liability Liability EXFO shall not be liable for damages resulting from the use of the product, nor shall be responsible for any failure in the performance of other items to which the product is connected or the operation of any system of which the product may be a part. EXFO shall not be liable for damages resulting from improper usage or unauthorized modification of the product, its accompanying accessories and software.
Warranty Service and Repairs Service and Repairs EXFO commits to providing product service and repair for five years following the date of purchase. To send any equipment for service or repair: 1. Call one of EXFO’s authorized service centers (see EXFO Service Centers Worldwide on page 154). Support personnel will determine if the equipment requires service, repair, or calibration. 2.
Warranty EXFO Service Centers Worldwide EXFO Service Centers Worldwide If your product requires servicing, contact your nearest authorized service center. EXFO Headquarters Service Center 400 Godin Avenue Quebec (Quebec) G1M 2K2 CANADA EXFO Europe Service Center Winchester House, School Lane Chandlers Ford, Hampshire S053 4DG ENGLAND EXFO Telecom Equipment (Shenzhen) Ltd. 3rd Floor, Building 10, Yu Sheng Industrial Park (Gu Shu Crossing), No.
A Technical Specifications IMPORTANT The following technical specifications can change without notice. The information presented in this section is provided as a reference only. To obtain this product’s most recent technical specifications, visit the EXFO Web site at www.exfo.com. BUILT-IN POWER METER SPECIFICATIONS (GeX) (optional) c Calibrated wavelengths (nm) 850, 1300, 1310, 1490, 1550, 1625, 1650 Power range (dBm) d 27 to —50 Uncertainty (%) e ±5 % ± 10 nW Display resolution (dB) 0.
Index Index A AC power adapter.................................................... 7 connector ................................................ 4 indicator ................................................ 26 operation............................................... 54 AC requirements ......................................... 15 accessing power meter................................ 77 ActiveSync ................................................... 84 adapter ...............................................
Index configuring computer............................................... 84 network settings.................................... 61 power schemes...................................... 54 unit........................................................ 23 wireless connection ............................... 97 connecting unit to network ....................................... 4 unit to wireless network ........................ 93 USB device ............................................. 37 connector cleaner.....
Index I M icon, battery.............................................. 124 identification label .................................... 145 identifying defects on fibers........................ 79 idle time, setting ......................................... 54 image formats............................................. 70 indoor use ................................................... 13 input current ............................................... 15 inspection probe .........................................
Index options Internet.................................................. 56 power meter and VFL .............................. 1 software ................................................ 34 stand ..................................................... 17 used at startup ...................................... 59 orange LED.................................................... 5 P pairing Bluetooth devices...................... 85, 87 parameters, network ...................................
Index starting applications ..................................... 26, 27 power meter application ....................... 77 probe application .................................. 79 wireless module..................................... 99 startup option ............................................. 59 status Bluetooth connection ............................ 86 wireless communication ........................ 93 stopping wireless module ........................... 99 storage requirements .......................
Index wireless encryption and protocol ........................ 97 icon ....................................................... 93 internal device ....................................... 99 network ................................................. 93 sticker ...................................................... 3 wizard, configuration.................................. 23 Y yellow LED.....................................................
NOTICE 抩⛙ CHINESE REGULATION ON RESTRICTION OF HAZARDOUS SUBSTANCES ₼⦌␂ℝ☀⹂䓸德棟Ⓟ䤓屓⸩ NAMES AND CONTENTS OF THE TOXIC OR HAZARDOUS SUBSTANCES OR ELEMENTS CONTAINED IN THIS EXFO PRODUCT ▔⚺⦷㦻 EXFO ℶ❐₼䤓㦘㹡㦘⹂䓸德㒥⏒侯䤓⚜䱿✛⚺摞 O X Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006 嫷䯉年㦘㹡㦘⹂䓸德⦷年捷ↅ㓏㦘⧖德㧟㠨₼䤓⚺摞⧖⦷ SJ/T11363-2006 㪖屓⸩䤓 棟摞尐㻑ⅴₚᇭ Indicates that this toxic or hazardous substance contained in at least one of the
MARKING REQUIREMENTS 㪖㽷尐㻑 Product Environmental protection use period (years) Logo ℶ❐ 䘾⬒≬㔳∎䞷㦮棟 ( ) 㪖㉦ This Exfo product 㦻 EXFO ℶ❐ Batterya 䟄㻯 a a. If applicable.
P/N: 1065931 www.EXFO.com · info@exfo.com CORPORATE HEADQUARTERS 400 Godin Avenue Quebec (Quebec) G1M 2K2 CANADA Tel.: 1 418 683-0211 · Fax: 1 418 683-2170 EXFO AMERICA 3400 Waterview Parkway Suite 100 Richardson, TX 75080 USA Tel.: 1 972-761-927 · Fax: 1 972-761-9067 EXFO EUROPE Winchester House, School Lane Chandlers Ford, Hampshire S053 4DG ENGLAND Tel.: +44 2380 246 800 · Fax: +44 2380 246 801 EXFO ASIA-PACIFIC 62 Ubi Road 1, #09-01/02 Oxley Bizhub 2 SINGAPORE 408734 Tel.
