User Manual

MaxTester 730C PON/metro OTDR
GENERAL SPECIFICATIONS
Size (H x W x D) 166 mm x 200 mm x 68 mm (6
9
/ 16 in x 7
7
/ 8 in x 2 ¾ in)
Weight (with battery) 1.5 kg (3.3 lb)
Temperature Operating
Storage
–10 °C to 50 °C (14 °F to 122 °F)
–40 °C to 70 °C (–40 °F to 158 °F)
a
Relative humidity 0 % to 95 % non-condensing
SOURCE
Output power (dBm)
b
–2.5
Modulation CW, 330 Hz, 1 kHz, 2 kHz, 1 kHz + blink, 2 kHz + blink
BUILT-IN POWER METER SPECIFICATIONS (GeX) (optional)
c
Calibrated wavelengths (nm) 850, 1300, 1310, 1490, 1550, 1625, 1650
Power range (dBm)
d
27 to —50
Uncertainty (%)
e
±5 % ± 10 nW
Display resolution (dB)
0.01 = max to —40 dBm
0.1 = —40 dBm to —50 dBm
Automatic offset nulling range
d, f
Max power to —30 dBm
Tone detection (Hz) 270/330/1000/2000
VISUAL FAULT LOCATOR (VFL) (optional)
Laser, 650 nm ± 10 nm
CW/Modulate 1 Hz
Typical P
out
in 62.5/125 µm: > –1.5 dBm (0.7 mW)
Laser safety: Class 2
LASER SAFETY (Complies with FDA 1040.10 and IEC 60825-1:2014)
With VFL:
IEC/CEI 60825-1:2014
Without VFL:
ACCESSORIES (optional)
GP-10-061 Soft carrying case GP-2208 Spare stylus
GP-10-072 Semi-rigid carrying case GP-2209 Spare battery
GP-10-100 Rigid carrying case GP-2240 Utility glove
GP-1008 VFL adapter (2.50 mm to 1.25 mm) GP-2242 Replacement hand strap
GP-2155 Carry-on size backpack GP-2243 Spare AC/DC adapter (specify country power cord)
GP-2205 DC vehicle battery-charging adaptor (12 V) GP-3115 Kickstand
a. –20 °C to 60 °C (–4 °F to 140 °F) with the battery pack.
b. Typical output power is given at 1550 nm.
c. At 23 ºC ± 1 ºC, 1550 nm and FC connector. With modules in idle mode. Battery operated after 20-minute warm-up.
d. Typical.
e. At calibration conditions.
f. For ±0.05 dB, from 10 °C to 30 °C.