User Manual

EXFO headquarters T [phone] Toll-free [phone] (USA and Canada)
EXFO serves over 2000 customers in more than 100 countries. To find your local office contact details, please go to www.EXFO.com/contact.
For the most recent patent marking information, please visit www.EXFO.com/patent. EXFO is certified ISO 9001 and attests to the quality of these products. EXFO has made every effort to ensure that
the information contained in this specification sheet is accurate. However, we accept no responsibility for any errors or omissions, and we reserve the right to modify design, characteristics and products
at any time without obligation. Units of measurement in this document conform to SI standards and practices. In addition, all of EXFO’s manufactured products are compliant with the European Union’s
WEEEdirective. For more information, please visit www.EXFO.com/recycle. ContactEXFOfor prices and availability or to obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to www.EXFO.com/specs.
In case of discrepancy, the web version takes precedence over any printed literature.
MaxTester 730C PON/metro OTDR
MAX730C.10EN © 2022 EXFO Inc. All rights reserved. Printed in Canada 22/03
EI CONNECTORS
To maximize the performance of your OTDR, EXFO recommends using APC connectors on singlemode port. These connectors generate lower reflectance,
which is a critical parameter that affects performance, particularly in dead zones. APC connectors provide better performance than UPC connectors, thereby
improving testing efficiency.
For best results, APC connectors are mandatory with the iOLM application.
Note: UPC connectors are also available. Simply replace EA-XX by EI-XX in the ordering part number. Additional connector available: EI-EUI-90 (UPC/ST).