User Manual

ManualsBrandsEXFO ManualsFiber Optic Network MaintenanceOptical Time Domain Reflectometer with IOLM

SPEC SHEET

KEY FEATURES

Handy, lightweight, powerful, tablet-inspired design

7-inch, outdoor-enhanced touchscreen–the biggest in the

handheld industry

12-hour autonomy

Tamper-proof password protection

Dead zones: EDZ 1 m, ADZ 4 m

Dynamic range of 30/28/28 dB

Rugged design built for outside plant

iOLM-ready: intelligent and dynamic application that turns

complex OTDR trace analysis into a one-touch task

APPLICATIONS

FTTx last-mile installation and troubleshooting

Short access-network testing

FTTA fiber-DAS installations

CATV/HFC network testing

MaxTester 715B last-mile OTDR

Fully featured, entry-level, dedicated OTDR with tablet-inspired design perfect for frontline singlemode

fiber installers.

POINT-TO-POINT (P2P) LINKS, LAST-MILE INSTALLATION

AND TROUBLESHOOTING

COMPLEMENTARY PRODUCTS AND OPTIONS

Fiber inspector scope

FIP-400B (WiFi or USB)

Data post-processing software

FastReporter

Soft pulse suppressor bag

SPSB

GLOBAL PORTABLE FIBER OPTIC TEST

EQUIPMENT MARKET LEADERSHIP AWARD

Summary of content (10 pages)

PAGE 1
MaxTester 715B last-mile OTDR POINT-TO-POINT (P2P) LINKS, LAST-MILE INSTALLATION AND TROUBLESHOOTING Fully featured, entry-level, dedicated OTDR with tablet-inspired design perfect for frontline singlemode fiber installers.
PAGE 2
MaxTester 715B last-mile OTDR THE HANDHELD OTDR. . . REINVENTED. The MaxTester 700B/C Series is the first tablet-inspired OTDR line that is handy, lightweight and rugged enough for any outside plant environment. With a 7-inch, outdoor-enhanced touchscreen–the most efficient handheld display in the industry–it delivers an unprecedented user experience. Its intuitive Windows-like GUI ensures a fast learning curve.
PAGE 3
MaxTester 715B last-mile OTDR iOLM—REMOVING THE COMPLEXITY FROM OTDR TESTING OTDR testing comes with its load of challenges... WRONG OTDR TRACES COUNTLESS TRACES TO ANALYZE REPEATING THE SAME JOB TWICE COMPLEX INSTRUMENT TRAINING/SUPPORT In response to these challenges, EXFO developed a better way to test fiber optics: The iOLM is an OTDR-based application designed to simplify OTDR testing by eliminating the need to configure parameters, and/or analyze and interpret multiple complex OTDR traces.
PAGE 4
MaxTester 715B last-mile OTDR GET THE BEST OUT OF YOUR DATA POST-PROCESSING— ONE SOFTWARE DOES IT ALL This powerful reporting software is the perfect complement to your OTDR, and can be used to create and customize reports to fully address your needs. AY AL -D RI 90 E T E FR CLOUD-BASED FIELD TEST MANAGEMENT– GET MORE FROM FastReporter WITH TestFlow The TestFlow process Whether you are a field technician, a site lead or a project manager, you can benefit from TestFlow.
PAGE 5
MaxTester 715B last-mile OTDR OPTICAL PLUG-AND-PLAY OPTIONS The MaxTester features plug-and-play optical options that can be purchased whenever you need them: at the time of your order or later on. In either case, installation is a snap, and can be performed by the user without the need for any software update. Optical power meter A high-level power meter (GeX) that can measure up to 27 dBm, the highest in the industry. This is essential for hybrid fiber-coaxial (HFC) networks or high-power signals.
PAGE 6
MaxTester 715B last-mile OTDR SOFTWARE UTILITIES Software update Ensure that your MaxTester is up-to-date with the latest software. VNC configuration The Virtual Network Computing (VNC) utility allows technicians to easily remote control the unit via a computer or laptop. Microsoft Internet Explorer Access the Web directly from your device interface. Data mover Transfer all your daily test results quickly and easily.
PAGE 7
MaxTester 715B last-mile OTDR SPECIFICATIONS a TECHNICAL SPECIFICATIONS Display 7-in (178-mm) outdoor-enhanced touchscreen, 800 x 480 TFT Interfaces Two USB 2.
PAGE 8
MaxTester 715B last-mile OTDR GENERAL SPECIFICATIONS Size (H x W x D) 155 mm x 200 mm x 68 mm (6 1/8 in x 7 7/8 in x 2 3/4 in) Weight (with battery) 1.29 kg (2.8 lb) Temperature –10 °C to 50 °C (14 °F to 122 °F) –40 °C to 70 °C (–40 °F to 158 °F) a Operating Storage Relative humidity 0 % to 95 % non-condensing SOURCE Output power (dBm) b –11.
PAGE 9
MaxTester 715B last-mile OTDR ORDERING INFORMATION MAX-715B-XX-XX-XX-XX-XX-XX-XX-XX-XX-XX-XX-XX Optical configuration M1 = Last-mile OTDR, 1310/1550 nm (9/125 µm) M2 = Last-mile OTDR, 1310/1550 nm and 1625 nm live port (9/125 µm) M3 = Last-mile OTDR, 1310/1550/1625 nm (9/125 µm) Base software OTDR = Enables OTDR application only iOLM = Enables iOLM application only Oi = Enables OTDR and iOLM applications Connector EA-EUI-28 = APC/DIN 47256 EA-EUI-89 = APC/FC narrow key EA-EUI-91 = APC/SC EA-EUI-95 = APC/E
PAGE 10
MaxTester 715B last-mile OTDR EI CONNECTORS To maximize the performance of your OTDR, EXFO recommends using APC connectors on singlemode port. These connectors generate lower reflectance, which is a critical parameter that affects performance, particularly in dead zones. APC connectors provide better performance than UPC connectors, thereby improving testing efficiency. For best results, APC connectors are mandatory with the iOLM application. Note: UPC connectors are also available.