Owner's manual

Running DSL/IP Tests and Viewing Results

82 MAX-630

DSL Parameter Details

The DSL Param Details tab displays the Downstream and Upstream

parameter results configured in the DSL/IP tests.

When the Test Inter face for Auto Test or Manual Test is set to ADSL2+ or

VDSL2 bonding mode, there will be 2 pages of results, one for each DSL

line-pair.

To access the second-pair results, press the Pair 1/2 function key at the

bottom-right of the screen.

 Line Status displays the status of the line under

test during negotiation with the DSLAM. The value

changes from Idle /Activate /Handshake /Training

/Show Time for ADSL2+ or VDSL2 mode.

Note: When loading firmware into the Broadcom chipset,

the Line Status value displays Loading M:SS, where

M:SS is a count down timer.

 Operation Mode is the DSL mode of operation as

negotiated between the unit and the DSLAM.

 CO Vendor ID is a unique 4-digit alphanumeric

identifier of the DSL chipset manufacturer used on the CO (central

office) side.

 CO Version is the version number of the unique alphanumeric

identifier of the DSL chipset used on the CO side.

 Sync loss count is the number of times the unit lost synchronization.