Owner's manual

Setting Up DSL/IP Tests

VDSL2/ADSL2+ Multi-play Test Set 53

Test Setup

Traceroute Test Setup

The Traceroute Test Setup tab allows you the

configure the following parameters:

 Address Format is URL or IP Address.

 Destination Address is the destination IP or URL

address.

 Max Hops specifies the maximum number of

hops (1 to 32) used in attempting to reach the

destination address.

 Timeout is the time in seconds from 1 to 10, that

the unit will wait for a response back from the

destination device.

To configure test setup values:

1. Press the up/down arrow keys to select the desired parameter.

2. Press the left/right arrow keys to view and select the options.

3. Press on a value to open a list box of options or the alphanumeric

editor screen and use the navigation keys to scroll through.

4. Press to confirm the value.

5. If you make any changes to the parameter values, press the on-screen

function keys to save or cancel your input.