Owner's manual

Setting Up DSL/IP Tests

44 MAX-630

Test Setup

 Communication Channel is the parameter based on either UDP or

TCP.

 Controller Setup button opens a new page that allows you to set the

required VoIP parameters for the unit.

 Proxy Setup button opens a new page that allows you to set

parameters for the Proxy.

To configure test setup values:

1. Press the up/down arrow keys to select the desired parameter.

2. Press the left/right arrow keys to view and select the options.

3. Press on a value to open a list box of options or the alphanumeric

editor screen and use the navigation keys to scroll through.

4. Press to confirm the value.

5. If you make any changes to the parameter values, press the on-screen

function keys to save or cancel your input.

Controller Setup

The Controller is the local VoIP connection for your

MaxTester. The Controller Setup Info page allows

you to set the following VoIP parameters for your unit:

 User Name allows you to enter alphanumeric

characters in this field using the editor screen to

create a name.

 Signalling Port (read only) displays a fixed

numeric value of the signalling port used to

establish an IP network session.

 Address Format (read only) displays DNS Name.

 Domain (read only) displays the domain name