Data Sheet

EXFO Headquarters
>
Tel.: [phone]
|
Toll-free: [phone] (USA and Canada)
|
Fax: [phone]
|
[e-mail]
|
www.EXFO.com
EXFO serves over 2000 customers in more than 100 countries. To find your local office contact details, please go to www.EXFO.com/contact.
EXFO is certified ISO 9001 and attests to the quality of these products. EXFO has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept no
responsibility for any errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and
practices. In addition, all of EXFO’s manufactured products are compliant with the European Union’s WEEE directive. For more information, please visit www.EXFO.com/recycle. Contact EXFO for prices and
availability or to obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to the EXFO website at www.EXFO.com/specs.
In case of discrepancy, the Web version takes precedence over any printed literature.
Keep this document for future reference.
MaxTester 730C PON/METRO OTDR
SPMAX730C.2AN © 2016 EXFO Inc. All rights reserved. Printed in Canada 16/03
EI CONNECTORS
To maximize the performance of your OTDR, EXFO recommends using APC connectors on singlemode port. These connectors generate lower
reflectance, which is a critical parameter that affects performance, particularly in dead zones. APC connectors provide better performance than UPC
connectors, thereby improving testing efficiency.
For best results, APC connectors are mandatory with the iOLM application.
Note: UPC connectors are also available. Simply replace EA-XX by EI-XX in the ordering part number. Additional connector available: EI-EUI-90 (UPC/ST).