User guide

Accessing a Remote CD-ROM Drive with the IQ-203
84 IQ-200
Accessing the Remote CD-ROM from a PC Connected Directly to the IQ-203
Accessing the Remote CD-ROM from the IQ-203
Before accessing the CD-ROM from your IQ-203, you need to configure
each system either as a host or a guest. Typically, the host is the PC with the
CD-ROM drive and the guest is your IQ-203. You must also specify the
communication ports that match the physical connection.
To access the CD-ROM from your IQ-203,
1. Configure the host so that it becomes available to the guest.
1a. Select Start > Programs > Accessories > Direct Cable Connection.
If this option is not available, refer to the Windows documentation
for installation instructions.
1b. If it is not already done, set the to Host computer set up to listen by
clicking on Change... and going through the proposed steps.
When you are done, the host is ready to accept a connection.