User guide

Maintenance and Troubleshooting
60 IQ-200
Replacing the Fuses
Replacing the Fuses
The IQ-203 Control Unit and IQ-206 Expansion Unit each contain two 250 V,
3.15 A (0.197 x 0.787 inches / 5 x 20 mm) slow blow fuses. The fuse holder
is located on the unit back panel, just beside the socket.
To replace the fuses,
1. Unplug the power cord from the unit.
2. Pull the fuse holder out.
3. Verify and replace the fuses if necessary.
4. Ensure that the fuses are firmly in the holder prior to reinsertion.
5. Firmly push the holder back into place.
Use only with a 250V fuse
Employer uniquement avec
un fusible de 250V