User guide

Using the IQ-200 Optical Test System
58 IQ-200
Powering the IQ-200 Optical Test System Off
Powering the IQ-200 Optical Test System Off
IMPORTANT
Before powering off the IQ-203 Control Unit and IQ-206 Expansion
Units, you must exit the IQ-200 Software and shut down Microsoft
Windows.
To exit the IQ-200 Software and Microsoft Windows,
1. In the IQ-200 Optical Test System main window, select Exit from the
File menu.
OR
Click on in the top right corner of the main window.
An information window will appear indicating a subsequent
deactivation of all module applications.
2. Choose OK to close all IQ module applications.
3. Shut down Microsoft Windows from the Windows Start menu.
To power off the IQ-203 Control Unit or IQ-206 Expansion Units, push the
ON/OFF button located in the bottom left corner of each unit.