User guide

Using the IQ-200 Optical Test System
Optical Test System 53
Starting and Using Module Applications
Note: For details about a particular module application, refer to the instruction
manual of the IQ module. A list of available IQ modules is given in IQ
Modules and Typical Applications on page 71.
Starting the Module Application
To open an IQ module application and display its main window,
➤ Double-click on the desired module icon along the bottom of the IQ
Software main window.
OR
➤ Press the LED button on the module front panel.
Note: Module applications may be set to automatically launch in 640 x 480
display resolution. For details, see Setting the Display Resolution for Module
Applications on page 50.
Exiting the Module Application
To exit a module application,
➤ Click on in the top right corner of the application main window.
OR
➤ Click on in the top right corner of the module monitor window.
Module
icons