User guide

Using the IQ-200 Optical Test System

Optical Test System 37

Getting Started with the Expansion Card

Before powering on the PC with an IQ-206 Expansion Card and the

IQ-206 Expansion Units, EXFO recommends that you carefully read the

previous sections of this instruction manual to ensure that

➤ you comply with the safety precautions, power requirements, and

other safety instructions given in Safety Information on page 9.

➤ you have connected the units together properly via the IQ interface

cable as specified in Connecting IQ-206 Expansion Units to an IQ-206

Expansion Card on page 25.

WARNING

Any failure to respect the safety and operation guidelines given in this

manual may void the product warranty and could result in product

damage or personal injury.

Note: For information about using the PC hosting the IQ-206 Expansion Card,

refer to the instruction manual that came with the PC.

To power on the IQ-200 Optical Test SystemI,

1. Make sure that all units are properly connected.

2. Insert the desired modules into the IQ-206 Expansion Units, as

explained in Inserting Modules in the IQ-203 or IQ-206 on page 39.

CAUTION

Never insert a module while an IQ-206 Expansion Unit is powered on.

This will result in immediate and irreparable damage to the module

and the IQ-206.