User guide

Installing and Configuring the IQ-200 Software
Optical Test System 29
Installing the IQ-200 Software
7. In the Select GPIB Components step, choose the type of GPIB material
you will use with your system.
7a. Select the radio button corresponding to your GPIB setup.
Examples are given below:
➤ None: if you have no GPIB card in your system.
➤ GPIB Device Drivers: if you have a GPIB device card in your
system. This card allows your system to be remotely
controlled by another instrument.
➤ GPIB Controller Configuration: if you have a GPIB controller
card in your system. Use this card to remotely control other
instruments.
7b. Click on Next > to move to the next step.