User guide

Optical Test System 27
4 Installing and Configuring
the IQ-200 Software
Installing the IQ-200 Software
If you have purchased an IQ-203 Control Unit, the IQ-200 Software should
have been pre-installed at the factory. If you are to use the software with an
IQ-206 Expansion Card or if you ever need to reinstall it on your IQ-203
Control Unit, use the CD-ROM provided with your IQ-200 Optical Test
System. In either case, Microsoft Windows must already be installed in the
host unit.
IMPORTANT
If your PC is not equipped with a CD-ROM drive, you could use the
Direct Cable Connection or your network to access another PC. For
help with these methods, see Accessing a Remote CD-ROM Drive with
the IQ-203 on page 79.
To install the IQ-200 Software on an IQ-203 or on a PC,
1. Insert the installation CD in your CD-ROM drive.
2. Select Run... from the Windows Start menu.
3. Type d:\setup (your drive letter may differ) in the Open text field.
4. Click on OK to launch the installation. The installation procedure first
detects the type of platform (PC or IQ-203) on which you are installing
the IQ-200 Software.
5. Close all programs, read the license agreement, and enter your name
and company, clicking on Next > after each step.