User guide

Installing and Connecting the IQ-200 Hardware
Optical Test System 23
Installing the IQ-206 Expansion Card
Adding a PCI Card in Microsoft Windows
Microsoft Windows will detect a new PCI card when you reboot your
computer and automatically offer you to install new drivers. You will need
access to a CD-ROM drive for this installation.
IMPORTANT
If your PC is not equipped with a CD-ROM drive, you could use the
Direct Cable Connection or your network to access another PC. For
help with these methods, see Accessing a Remote CD-ROM Drive with
the IQ-203 on page 79.
Note: The illustrations provided in this section were made with Windows 98. The
Wizard may look slightly different if you are using Windows 95, but the
procedure is similar.
To make Microsoft Windows correctly detect the new PCI expansion card,
1. After inserting the PCI card into the computer, turn on the computer.
When Windows is loaded, the Add New Hardware wizard will guide
you through the steps of card detection.
2. Click on Next to start searching for drivers associated with the card.