User guide

Installing and Connecting the IQ-200 Hardware

14 IQ-200

Setting Up the IQ-200 for Rack-Mount Use

Each IQ-203 Control Unit and IQ-206 Expansion Unit has two rear cooling

fans. Mount or position the units so that air can circulate freely around

them. When operating the unit, choose a location that provides at least

➤ 75 mm (3 inches) of rear clearance

➤ 25 mm (1 inch) of side clearance (left and right)

➤ 25 mm (1 inch) of top clearance

Failure to provide adequate cooling clearance may result in an excessive

internal temperature, thus reducing unit reliability.

Before being inserted into a rack, IQ-203 Control Units or IQ-206 Expansion

Units must first be installed into an optional rack-mount kit. To do so,

1. Assemble the rack-mount panels and handles using the screws and

lockwashers supplied with the kit.

Left panel

Right panel

Handle screws

Lockwashers

Handle screw

Lockwasher

Handles

Front panel