User guide

Safety Information

Optical Test System 11

AC and Power Cable Requirements

The IQ-203 can operate from any single-phase AC power source between

100 V and 240 V (50/60 Hz). The maximum input current of the IQ-203 is

1.5 A.

The IQ-206 can operate from any single-phase AC power source between

100 V and 240 V (50/60 Hz). The maximum input current of the IQ-206 is

3.0 A.

This unit uses an international safety standard three-wire power cable. This

cable serves as a ground when connected to an appropriate AC power

receptacle. The type of power cable supplied with each unit is determined

according to the country of destination. The figure below illustrates the

different power cables available.

Only qualified electricians should connect a new plug if needed. The color

coding used in the electric cable depends on the cable. New plugs should

meet the local safety requirements and include the following features:

➤ adequate load-carrying capacity

➤ ground connection

➤ cable clamp

Australia

Great Britain

South Africa

Europe

United States