User guide

IQ-200 Optical Test System Overview
4 IQ-200
IQ-206 Expansion Unit
IQ-206 Expansion Unit
The IQ-206 is called the expansion unit of the IQ-200 Optical Test System
because it is usually used to expand the module capacity of an IQ-203
Control Unit. You can link up to four IQ-206 Expansion Units to an IQ-200
Optical Test System. Each IQ-206 Expansion Unit can support up to six
modules, which are either controlled from an IQ-203 Control Unit or an
IQ-206 Expansion Card, via the Windows compatible IQ-200 Software.
You can find installation instructions for the IQ-206 Expansion Unit in
Installing and Connecting the IQ-200 Hardware on page 13, as well as help
with the software in Using the IQ-200 Optical Test System on page 35.
IQ-206 Front Panel
DEFABC
IQ-206
EXPANSION UNIT
ACTIVE
OUT
IN
LIGHT SOURCE
IQ-2100IQ-1100 IQ-3100
POWER METER
VARIABLE ATTENUATOR
RM
IN
IQ-3300
VARIABLE REFLECTOR
OUT
OPTICAL SWITCH
IQ-9100
S2
C
S1
OPTICAL SWITCH
IQ-9100
C
S1
S2
S3
S4
Electro-Optical Engineering
Sequential position display
Indicates the position of the unit within the
IQ-200 system. The unit closest to the IQ-203
Control Unit or IQ-206 Expansion Card is
numbered 1, the second closest is numbered
2, etc., up to four IQ-206 Expansion Units.
IQ modules
ON/OFF button
Powers the IQ-206 on and off.