Optical Test System P/N: MAN-056-I .7ACE IQ-200 User Guide CORPORATE HEADQUARTERS 400 Godin Avenue Vanier (Quebec) G1M 2K2 CANADA Tel.: 1 418 683-0211 · Fax: 1 418 683-2170 EXFO AMERICA 4275 Kellway Circle, Suite 122 Addison TX, 75001 USA Tel.: 1 972 836-0100 · Fax: 1 972 836-0164 EXFO EUROPE Le Dynasteur 10/12, rue Andras Beck 92366 Meudon la Forêt Cedex FRANCE Tel.: +33.1.40.83.85.85 · Fax: +33.1.40.83.04.42 EXFO ASIAPACIFIC 151 Chin Swee Road #03-29, Manhattan House SINGAPORE 169876 Tel.
Optical Test System P/N: MAN-056-I .7ACE IQ-200 User Guide CORPORATE HEADQUARTERS 400 Godin Avenue Vanier (Quebec) G1M 2K2 CANADA Tel.: 1 418 683-0211 · Fax: 1 418 683-2170 EXFO AMERICA 4275 Kellway Circle, Suite 122 Addison TX, 75001 USA Tel.: 1 972 836-0100 · Fax: 1 972 836-0164 EXFO EUROPE Le Dynasteur 10/12, rue Andras Beck 92366 Meudon la Forêt Cedex FRANCE Tel.: +33.1.40.83.85.85 · Fax: +33.1.40.83.04.42 EXFO ASIAPACIFIC 151 Chin Swee Road #03-29, Manhattan House SINGAPORE 169876 Tel.
IQ-200 Optical Test System Instruction Manual Seventh Edition P/N: MAN-056-I .7ACE If the equipment described herein bears the symbol, the said equipment complies with the European Community Directive and Standards found in the Declaration of Conformity. If the equipment described herein bears an FCC statement, the said equipment complies with the relevant Federal Communications Commission standards.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, be it electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of EXFO Electro-Optical Engineering Inc. (EXFO). Information provided by EXFO is believed to be accurate and reliable.
Contents Contents Certification Information..........................................................................................................v 1 IQ-200 Optical Test System Overview .......................................................... 1 IQ-203 Control Unit................................................................................................................. 1 IQ-206 Expansion Unit .......................................................................................................
Contents 6 Maintenance and Troubleshooting ............................................................59 Cleaning the IQ-203 Control Unit and IQ-206 Expansion Unit............................................... 59 Replacing the Fuses ............................................................................................................... 60 Defragmenting Drives and Files............................................................................................. 61 Scanning Hard Disks for Errors ...
Certification Information Certification Information F.C.C. INFORMATION TO USER This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 (Subpart B) of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Certification Information ➤ This unit is equipped with a shielded three-wire power cord and plug. Use this power cord in conjunction with a properly grounded electrical outlet to avoid electrical shock and to reduce radio frequency interference that may emanate from the power cord. ➤ Use of shielded remote I/O cables, with properly grounded shields and metal connectors, is recommended in order to reduce radio frequency interference that may emanate from these cables.
1 IQ-200 Optical Test System Overview The IQ-200 product line is a modular optical test system designed for laboratory application. Thanks to the Windows compatible IQ-200 Software, the IQ-200 Optical Test System combines power, performance, and flexibility with a user-friendly interface. The main components of the system are the IQ-203 Control Unit, which can house up to three modules, and the IQ-206 Expansion Unit, which can house up to six modules.
IQ-200 Optical Test System Overview IQ-203 Control Unit IQ-203 Front Panel 3.5” high density floppy disk drive Integrated VGA display Loads or saves data on floppy disk. Front panel keys Front panel mouse Activate different software commands (see Using the Front Panel Keys on page 43). Activates software commands, like a conventional mouse.
IQ-200 Optical Test System Overview IQ-203 Control Unit IQ-203 Back Panel Modem card and ports (optional) Additional DB9 serial port (optional) GPIB port (optional) Certification and warning label Fan Fan Fuse holder Nameplate AC socket IQ-206 port Monitor port Printer port DB9 serial port Keyboard port Mouse port (PS/2) Note: Actual ports on your unit may differ from those depicted in the illustration.
IQ-200 Optical Test System Overview IQ-206 Expansion Unit IQ-206 Expansion Unit The IQ-206 is called the expansion unit of the IQ-200 Optical Test System because it is usually used to expand the module capacity of an IQ-203 Control Unit. You can link up to four IQ-206 Expansion Units to an IQ-200 Optical Test System. Each IQ-206 Expansion Unit can support up to six modules, which are either controlled from an IQ-203 Control Unit or an IQ-206 Expansion Card, via the Windows compatible IQ-200 Software.
IQ-200 Optical Test System Overview IQ-206 Expansion Unit IQ-206 Back Panel Fan Certification and warning label Fuse holder Fan Nameplate IQ output port IQ input port Used to link the unit to another IQ-206 Expansion Unit Used to link the unit to an IQ-203 Control Unit, IQ-206 Expansion Card, or IQ-206 Expansion Unit This symbol, found at the back of the IQ-206 Expansion Unit, indicates that the user should refer to the instruction manual for fuse replacement and power rating.
IQ-200 Optical Test System Overview IQ-206 Expansion Card IQ-206 Expansion Card The IQ-206 Expansion Card is designed to emulate an IQ-203 Control Unit. Once installed in a PC, the IQ-206 Expansion Card allows you to control up to four IQ-206 Expansion Units, which represent 24 single-slot IQ modules. To operate the IQ-206 Expansion Card, you need to install the Windows compatible IQ-200 Software on the host computer.
IQ-200 Optical Test System Overview IQ-206 Expansion Card PCI Expansion Card Diagram ISA Expansion Card Diagram DIP switches Optical Test System 7
IQ-200 Optical Test System Overview Remote Control of the IQ-200 Optical Test System Remote Control of the IQ-200 Optical Test System In addition to stand-alone operation, the IQ-200 Optical Test System can be remotely controlled through one of the following methods: ➤ GPIB interface ➤ RS-232 external interface ➤ Windows OLE (Object Linking and Embedding) automation ➤ Windows DDE (Dynamic Data Exchange) communication channel The GPIB and IQ-Application Development Guide, included with each IQ-203 C
2 Safety Information Safety Conventions You should understand the following conventions before using the product described in this manual: WARNING CAUTION IMPORTANT Refers to a potential personal hazard. It requires a procedure which, if not correctly followed, may result in bodily harm or injury. Do not proceed beyond a WARNING unless you understand and meet the required conditions. Refers to a potential product hazard.
Safety Information Electrostatic Discharge Precautions WARNING The IQ-203 Control Unit was designed to be a test instrument that should not be opened by users. EXFO is not responsible for any personal injury incurred while attempting internal service of the IQ-203 Control Unit or IQ-206 Expansion Unit. ➤ Unit covers cannot be removed during operation.
Safety Information AC and Power Cable Requirements AC and Power Cable Requirements The IQ-203 can operate from any single-phase AC power source between 100 V and 240 V (50/60 Hz). The maximum input current of the IQ-203 is 1.5 A. The IQ-206 can operate from any single-phase AC power source between 100 V and 240 V (50/60 Hz). The maximum input current of the IQ-206 is 3.0 A. This unit uses an international safety standard three-wire power cable.
Safety Information AC and Power Cable Requirements WARNING To avoid electrical shock, do not operate the unit if there are signs of damage to any part of the outer surface (covers, panels, etc.). To avoid serious injury, the following precautions must be observed before powering ON the unit. 12 ➤ If the unit is to be powered via an auto transformer for voltage reduction, connect the common terminal to the grounded power source pole.
3 Installing and Connecting the IQ-200 Hardware The IQ-200 Optical Test System can include up to four IQ-206 Expansion Units connected in a daisy chain with an IQ-203, allowing 27 single-slot linked modules.
Installing and Connecting the IQ-200 Hardware Setting Up the IQ-200 for Rack-Mount Use Setting Up the IQ-200 for Rack-Mount Use Each IQ-203 Control Unit and IQ-206 Expansion Unit has two rear cooling fans. Mount or position the units so that air can circulate freely around them.
Installing and Connecting the IQ-200 Hardware Setting Up the IQ-200 for Rack-Mount Use 2. Power OFF the IQ-203/IQ-206 and remove the four bottom cover screws under the IQ-203/IQ-206 as shown below. 3. Slide the IQ-203/IQ-206 inward through the rack-mount front panel, with the front of the unit facing you. Be careful not to break the warranty stickers on the IQ-203/IQ-206.
Installing and Connecting the IQ-200 Hardware Setting Up the IQ-200 for Rack-Mount Use 4. Use the flange screws and flat washers supplied with the kit to secure the IQ-203/IQ-206 onto the rack-mount flanges. 5. Insert the rack-mounted IQ-203/IQ-206 into the cabinet as shown below and secure in place using the hardware supplied with the rack.
Installing and Connecting the IQ-200 Hardware Connecting IQ-206 Expansion Units to an IQ-203 Control Unit Connecting IQ-206 Expansion Units to an IQ-203 Control Unit Up to four IQ-206 Expansion Units can be connected to the IQ-203 Control Unit, which represents a total of 27 single-slot modules. The necessary interface cable to connect an IQ-206 Expansion Unit to another IQ-206 Expansion Unit or IQ-203 Control Unit is supplied with the IQ-206 Expansion Unit. Connections are shown on the next page.
Installing and Connecting the IQ-200 Hardware Connecting IQ-206 Expansion Units to an IQ-203 Control Unit IQ-203 Control Unit R LR107723 LISTED L Test Equipment XXXX E182628 S/N 100-240 V 50/60 Hz 1.5 A F3AL250 V Ver. P/N Made in Canada Use only with a 250V fuse Employer uniquement avec un fusible de 250V ! QST-93 R This device complies with part 15 of the FCC rules.
Installing and Connecting the IQ-200 Hardware Installing the IQ-206 Expansion Card Installing the IQ-206 Expansion Card The IQ-206 Expansion Card is available in two models: ISA and PCI. Both cards provide the same functionality, but the installation procedure is not exactly the same, as explained below. To determine the type of card you have, see IQ-206 Expansion Card on page 6. Minimum PC Requirements The IQ-206 Expansion Card has a power consumption of less than 200 mA.
Installing and Connecting the IQ-200 Hardware Installing the IQ-206 Expansion Card 4. Firmly insert the IQ-206 Expansion Card into any appropriate expansion slot with due care and secure the card in place. 5. Reassemble the computer cover and tightly replace every screw. 6. In the case of a PCI card, turn on the computer and ensure the card is correctly detected and its driver installed as explained in Adding a PCI Card in Microsoft Windows on page 23. 7.
Installing and Connecting the IQ-200 Hardware Installing the IQ-206 Expansion Card The I/O port address is a hexadecimal number and must be any multiple of 020h within the range of 060h to 03C0h. The hexadecimal address is then converted into binary code so the DIP switches can be set to the “1” position (OFF) or to the “0” position (ON). The most commonly used I/O addresses are listed in the following table.
Installing and Connecting the IQ-200 Hardware Installing the IQ-206 Expansion Card The possible IRQ numbers and their corresponding DIP switch settings are listed in the table below. IRQ Number DIP Switch Setting 6 7 8 IRQ5 0 0 0 IRQ7 1 0 0 IRQ9 0 1 0 IRQ10 1 1 0 IRQ11 0 0 1 IRQ12 1 0 1 IRQ15 0 1 1 Note: The recommended IRQ number for the IQ-206 Expansion Card is IRQ9. If the host computer is equipped with a PS/2 mouse port, do not set the IQ-206 Expansion Card to IRQ12.
Installing and Connecting the IQ-200 Hardware Installing the IQ-206 Expansion Card Adding a PCI Card in Microsoft Windows Microsoft Windows will detect a new PCI card when you reboot your computer and automatically offer you to install new drivers. You will need access to a CD-ROM drive for this installation. IMPORTANT If your PC is not equipped with a CD-ROM drive, you could use the Direct Cable Connection or your network to access another PC.
Installing and Connecting the IQ-200 Hardware Installing the IQ-206 Expansion Card 3. Select the Search for the best driver option and click on Next. 4. Insert the CD-ROM that was included with your IQ-206 Expansion Card in your CD drive and check only the Specify a location box. Use the Browse... button to locate it and click on Next to start searching. IMPORTANT EXFO recommends that you do not use the Floppy disk drives or CD-ROM drive options.
Installing and Connecting the IQ-200 Hardware Connecting IQ-206 Expansion Units to an IQ-206 Expansion Card Connecting IQ-206 Expansion Units to an IQ-206 Expansion Card Once installed into a PC, the IQ-206 Expansion Card can control up to four IQ-206 Expansion Units, which represents a total of 24 single-slot modules. The necessary interface cable to connect an IQ-206 Expansion Unit to another IQ-206 Expansion Unit or IQ-203 Control Unit is supplied with the IQ-206 Expansion Unit.
Installing and Connecting the IQ-200 Hardware Connecting IQ-206 Expansion Units to an IQ-206 Expansion Card IQ-206 Expansion Card installed into a PC 110 Use only with a 250V fuse Employer uniquement avec un fusible de 250V F3AL250 V R LR107723 LISTED L Test Equipment XXXX E182628 R QST-99 ! 100-120/200-240 V 50/60 Hz 3.0/2.0 A 115 This device complies with part 15 of the FCC rules.
4 Installing and Configuring the IQ-200 Software Installing the IQ-200 Software If you have purchased an IQ-203 Control Unit, the IQ-200 Software should have been pre-installed at the factory. If you are to use the software with an IQ-206 Expansion Card or if you ever need to reinstall it on your IQ-203 Control Unit, use the CD-ROM provided with your IQ-200 Optical Test System. In either case, Microsoft Windows must already be installed in the host unit.
Installing and Configuring the IQ-200 Software Installing the IQ-200 Software 6. In the Select Components step, choose the software components you want to install on your IQ-203 or PC. 6a. Check the boxes corresponding to the components to install. ➤ Program Files: necessary files to use the IQ-200 Optical Test System software. This option is mandatory. ➤ EXFO Screen Saver: a Microsoft Windows screen saver that provides information about EXFO products and features.
Installing and Configuring the IQ-200 Software Installing the IQ-200 Software 7. In the Select GPIB Components step, choose the type of GPIB material you will use with your system. 7a. Select the radio button corresponding to your GPIB setup. Examples are given below: ➤ None: if you have no GPIB card in your system. ➤ GPIB Device Drivers: if you have a GPIB device card in your system. This card allows your system to be remotely controlled by another instrument.
Installing and Configuring the IQ-200 Software Installing the IQ-200 Software 8. Verify the installation parameters and click on Next > to start installing files. During the installation, you will be asked to configure the IQ-200 Software to match your hardware. For details, see Configuring the IQ-200 Drivers on page 31. 9. Read the information contained in the ReadMe.txt file. It provides last-minute information about the software and module applications.
Installing and Configuring the IQ-200 Software Configuring the IQ-200 Drivers Configuring the IQ-200 Drivers When running on a PC, the IQ-200 Software must match the configuration of the IQ-206 Expansion Card. The configuration utility allows you to set the IQ-200 Software drivers to the correct IRQ and base I/O address (ISA expansion card only) and to set the GPIB card parameters.
Installing and Configuring the IQ-200 Software Configuring the IQ-200 Drivers The hardware equipment (IQ-203 Control Unit or IQ-206 Expansion Card) should be automatically detected. IMPORTANT When running on an IQ-203 Control Unit, the IQ-200 Software automatically configures itself to the default settings. In this case, you should not change the parameters in the IQ Configuration Tool. 3.
Installing and Configuring the IQ-200 Software Uninstalling the IQ-200 Software Uninstalling the IQ-200 Software To uninstall the IQ-200 Software, 1. In the Windows Start menu, select Control Panel. 2. Select the Add/Remove Programs icon to display a list of all the software installed on your unit. 3. Select the one(s) you wish to remove and click on Remove. You may be asked to reboot your computer after the operation.
This page is intentionally left blank.
5 Using the IQ-200 Optical Test System Getting Started with the IQ-203 Control Unit Before powering on the IQ-203 Control Unit and IQ-206 Expansion Unit, EXFO recommends that you carefully read the previous sections of this instruction manual to ensure that ➤ you comply with the safety precautions, power requirements, and other safety instructions given in Safety Information on page 9.
Using the IQ-200 Optical Test System Getting Started with the IQ-203 Control Unit 3. Power on the IQ-206 Expansion Unit(s) by pushing the ON/OFF button located in the bottom left corner of each unit. IMPORTANT Modules inserted in IQ-206 Expansion Units must be electrically powered for the IQ-200 Software to recognize them. Therefore, always power on the IQ-206 Expansion Units before powering on the IQ-203 Control Unit and loading the IQ-200 Software. 4.
Using the IQ-200 Optical Test System Getting Started with the Expansion Card Getting Started with the Expansion Card Before powering on the PC with an IQ-206 Expansion Card and the IQ-206 Expansion Units, EXFO recommends that you carefully read the previous sections of this instruction manual to ensure that ➤ you comply with the safety precautions, power requirements, and other safety instructions given in Safety Information on page 9.
Using the IQ-200 Optical Test System Getting Started with the Expansion Card 3. Power on the IQ-206 Expansion Unit(s) by pushing the ON/OFF button located in the bottom left corner of each unit. IMPORTANT Modules inserted in IQ-206 Expansion Units must be electrically powered for the IQ-200 Software to recognize them. Therefore, always power on the IQ-206 Expansion Units before loading the IQ-200 Software. 4.
Using the IQ-200 Optical Test System Inserting Modules in the IQ-203 or IQ-206 Inserting Modules in the IQ-203 or IQ-206 CAUTION Never insert a module while the IQ-203 Control Unit or IQ-206 Expansion Card is powered on. This will result in immediate and irreparable damage to the module and the IQ-203 or IQ-206. To insert an IQ module in the IQ-200 Optical Test System, 1. Exit the IQ-200 Software and power off the IQ-203 and IQ-206.
Using the IQ-200 Optical Test System Removing Modules from the IQ-203 or IQ-206 Removing Modules from the IQ-203 or IQ-206 CAUTION Never remove a module while the IQ-203 Control Unit or the IQ-206 Expansion Unit is powered on. This will result in immediate and irreparable damage to the module and the IQ-203 or IQ-206. Depending on the locking system with which the module is designed, there are two ways to remove an IQ module from the IQ-203 Control Unit or IQ-206 Expansion Unit. 1.
Using the IQ-200 Optical Test System Understanding the IQ-200 Software Understanding the IQ-200 Software The IQ-200 Software main window is illustrated below. Menu bar Module application icons IQ Settings icon Status bar Closed Application Minimized Application Red icon with a frame. Green icon with no frame. The IQ module icons represent the modules detected by the IQ-200 Optical Test System at power up.
Using the IQ-200 Optical Test System Understanding the IQ-200 Software Using the Front Panel Mouse The front panel mouse operates as a standard computer mouse. Hold Button To initiate mouse dragging. Arrow Buttons To move the mouse pointer. Right Button To display contextual menus. Left Button To select elements. To drag elements with the front panel mouse, 1. Using the arrow buttons, position the cursor on the selection. 2. Activate the mouse drag function by pressing the button. 3.
Using the IQ-200 Optical Test System Understanding the IQ-200 Software Using the Front Panel Keys The IQ-203 front panel keys may be used as hardware keys, as described: Key Function ➤ When another Windows application runs, return to the IQ-200 Software. ➤ When an IQ application is open, display its monitor window. ➤ When several monitor windows are open, switch between them.
Using the IQ-200 Optical Test System Understanding the IQ-200 Software Typing Values with the Software Keypad When an external keyboard is not available, you can use the numeric or alphanumeric software keypad to enter data in the IQ-200 Software. To enter values using the software keypad, 1. Double-click in the box or field where a value must be entered to display the appropriate keypad window.
Using the IQ-200 Optical Test System Customizing the IQ-200 Optical Test System Customizing the IQ-200 Optical Test System Selecting an LCD or CRT Screen You can select to have the software displayed on the built-in screen of the IQ-203 Control Unit or on an external monitor. To select the type of screen, 1. Open the IQ Settings dialog box (shown below) by double-clicking on the IQ Settings icon at the bottom of the main window. 2. Select the screen type in the Display section.
Using the IQ-200 Optical Test System Customizing the IQ-200 Optical Test System Activating and Deactivating the Front Panel Lights You can switch off all lights on all screens and module lights on the IQ components. This is useful when you need to use the IQ-200 Optical Test System in a dark environment. Note: Floppy disk access light and hard disk LED may sometimes illuminate. To activate or deactivate the front panel lights, 1.
Using the IQ-200 Optical Test System Customizing the IQ-200 Optical Test System Activating and Deactivating the Front Panel Keys You can disable all front panel keys on your IQ-203 Control Unit to deny user intervention while your system is running. To activate or deactivate the front panel keys, 1. Open the IQ Settings dialog box (shown below) by double-clicking on the IQ Settings icon at the bottom of the main window. 2. Check the Disable Front Panel Keys box. 3. Click on OK to accept the changes.
Using the IQ-200 Optical Test System Customizing the IQ-200 Optical Test System Changing Mouse Tracking Speed You can set the delay for the first and second increase in tracking speed on your front panel mouse. Note: This feature is enabled in non-Pentium systems only. To change the front panel mouse speed, 1. Open the IQ Settings dialog box (shown below) by double-clicking on the IQ Settings icon at the bottom of the main window. 2. Move the scroll bars for Interval 1 or Interval 2. 3.
Using the IQ-200 Optical Test System Customizing the IQ-200 Optical Test System Renaming Modules You can customize the text appearing in the title bar of a module application. This may be useful when you use several similar modules. To modify the module name, 1. Open the IQ Settings dialog box (shown below) by double-clicking on the IQ Settings icon at the bottom of the main window. 2. Click on the ID button in the Hardware section to display the Module Identification dialog box (shown below). 3.
Using the IQ-200 Optical Test System Customizing the IQ-200 Optical Test System Setting the Display Resolution for Module Applications You can set all module applications to automatically launch in 640 x 480 display resolution. Otherwise, applications will launch in the default resolution of your PC. To ensure that all module applications start in 640 x 480 resolution, 1. Open the IQ Settings dialog box (shown below) by double-clicking on the IQ Settings icon at the bottom of the main window. 2.
Using the IQ-200 Optical Test System Customizing the IQ-200 Optical Test System Opening and Saving a Software Configuration Configuration files allow you to store commonly used parameters to reuse them later. Parameters that are saved include: ➤ position and size of monitor windows and module icons ➤ parameters defined in the IQ Settings dialog box To open a previously saved configuration, 1. Select Open Config... from the File menu. 2. In the Open config dialog box, select a .CFG file. 3. Click on OK.
Using the IQ-200 Optical Test System Starting and Using Module Applications Starting and Using Module Applications The main window of a module application contains all module operation commands.
Using the IQ-200 Optical Test System Starting and Using Module Applications Note: For details about a particular module application, refer to the instruction manual of the IQ module. A list of available IQ modules is given in IQ Modules and Typical Applications on page 71. Starting the Module Application To open an IQ module application and display its main window, ➤ Double-click on the desired module icon along the bottom of the IQ Software main window.
Using the IQ-200 Optical Test System Displaying the Module Monitor Window Displaying the Module Monitor Window The monitor window of a module is a small window containing basic operation information for quick reference. It is ideal for use in tile format on the screen (27 monitor windows can be viewed simultaneously). The monitor window for the IQ-1100 Power Meter is shown below: Note: Refer to the instruction manual that came with your particular module for further information about its monitor window.
Using the IQ-200 Optical Test System Displaying the Module Monitor Window Arranging Monitor Windows on the Screen To arrange all open monitor applications on the screen in a standard Windows cascade format, select Cascade from the Window menu. To arrange all open monitor applications on the screen in a standard Windows tile format, select Tile from the Window menu.
Using the IQ-200 Optical Test System Controlling the IQ-200 Remotely Controlling the IQ-200 Remotely The status bar indicates the module control status as described in the following table. For more information about remotely controlling the IQ-200 Optical Test System, refer to the GPIB and Application Development Guide. Indication Local Meaning The IQ-200 Optical Test System is controlled locally. Remote The IQ-200 Optical Test System is controlled remotely but local commands can still be used.
Using the IQ-200 Optical Test System Getting Help in the IQ-200 Software Getting Help in the IQ-200 Software The following table describes the possible ways to obtain help or information from the Help menu: Option Function Online Manual Opens this instruction manual in PDF format. You need to have Adobe Acrobat Reader installed on your IQ-200 Optical Test System. Tip of the day Displays the Tip of the Day dialog box. About...
Using the IQ-200 Optical Test System Powering the IQ-200 Optical Test System Off Powering the IQ-200 Optical Test System Off IMPORTANT Before powering off the IQ-203 Control Unit and IQ-206 Expansion Units, you must exit the IQ-200 Software and shut down Microsoft Windows. To exit the IQ-200 Software and Microsoft Windows, 1. In the IQ-200 Optical Test System main window, select Exit from the File menu. OR Click on in the top right corner of the main window.
6 Maintenance and Troubleshooting The IQ-200 Optical Test System family components have been designed to require a minimum of maintenance and provide reliable operation for many years. In addition, the IQ-203 has the same characteristics as a computer, therefore, similar care should be taken. Cleaning the IQ-203 Control Unit and IQ-206 Expansion Unit To help ensure long, trouble-free operation, ➤ keep the unit free of dust; ➤ be careful not to spill liquids into the unit.
Maintenance and Troubleshooting Replacing the Fuses Replacing the Fuses The IQ-203 Control Unit and IQ-206 Expansion Unit each contain two 250 V, 3.15 A (0.197 x 0.787 inches / 5 x 20 mm) slow blow fuses. The fuse holder is located on the unit back panel, just beside the socket. To replace the fuses, 1. Unplug the power cord from the unit. 2. Pull the fuse holder out. Use only with a 250V fuse Employer uniquement avec un fusible de 250V 3. Verify and replace the fuses if necessary. 4.
Maintenance and Troubleshooting Defragmenting Drives and Files Defragmenting Drives and Files Over time, as applications read, write, and delete files, information stored on the IQ-203 Control Unit hard disk may become fragmented. Basically, fragmented files are longer to access and read than unfragmented files. To reorganize the files on the disk and, thus, optimize disk performance, it is recommended to perform a defragmentation at least weekly.
Maintenance and Troubleshooting Troubleshooting the IQ-203 Control Unit and IQ-206 Expansion Unit Troubleshooting the IQ-203 Control Unit and IQ-206 Expansion Unit Problem Probable Cause Recommended Action AC power not applied. Verify AC power cord connection, then power on IQ-203 or IQ-206. Fuse blown Verify the fuses (see Replacing the Fuses on page 60). LCD/CRT display not activated Press the front panel key, or select an LCD/ CRT display in Display menu when LCD/CRT lights up.
Maintenance and Troubleshooting Troubleshooting the IQ-206 Expansion Card Troubleshooting the IQ-206 Expansion Card Problem Probable Cause ➤ The IQ-206 Expansion Unit is not powered on. ➤ The modules are not properly inserted into their slot. Recommended Action 1. Power off the PC running the IQ-200 Software and power off the IQ-206 Expansion Unit. 2. Make sure the modules are properly inserted into their slots. IQ-200 Software ➤ The IQ interface cable 3.
Maintenance and Troubleshooting Transportation and Storage Transportation and Storage Maintain a temperature range within specifications when transporting or storing the unit. Transportation damage can occur from improper handling. The following steps are recommended to minimize the possibility of damage: ➤ Pack the unit in the original packing material when shipping. ➤ Store unit at room temperature in a clean and dry area. Avoid high humidity or large temperature fluctuations.
7 Technical Specifications Electrical Specifications IQ-203 Control Unit IQ-206 IQ-206 Expansion Unit Expansion Card Supply voltage 100 to 240 VAC 100 to 240 VAC — Line frequency 50 to 60 Hz 50 to 60 Hz — 1.5 A 3.0 A — 250 V, 3.15 A slow blow 250 V, 3.
Technical Specifications Environmental Specifications Environmental Specifications IQ-203 Control Unit IQ-206 Expansion Unit IQ-206 Expansion Card 32° to 122°F (0° to +50°C) 32° to 131°F (0° to +55°C) 32° to 131°F (0° to +55°C) -4° to 140°F (-20° to +60°C) -40° to 158°F (-40° to +70°C) -4° to 140°F (-20° to +60°C) Relative humidity 80% (non-condensing) 95% (non-condensing) 95% (non-condensing) Maximum altitude 6000 ft./2000 m 6000 ft.
8 Warranty General Information EXFO Electro-Optical Engineering Inc. (EXFO) warrants this equipment against defects in material and workmanship for a period of two years from the date of original shipment. EXFO also warrants that this equipment will meet applicable specifications under normal use. During the warranty period, EXFO will, at its discretion, repair, replace, or issue credit for any defective product.
Warranty Liability Liability EXFO shall not be liable for damages resulting from the use of the purchased product, nor shall be responsible for any failure in the performance of other items to which the purchased product is connected or the operation of any system of which the purchased product may be a part. EXFO shall not be liable for damages resulting from improper usage or unauthorized modification of the product, its accompanying accessories and software.
Warranty Service and Repairs IMPORTANT Never send any unit or accessory back to EXFO without a Return Merchandise Authorization (RMA). 3. If the unit has an internal storage device, do a backup of your data before sending the unit for repairs. 4. Pack the equipment in its original shipping material. Be sure to include a statement or report fully detailing the defect and the conditions under which it was observed. 5. Return the equipment, prepaid, to the address given by the support personnel.
This page is intentionally left blank.
A IQ Modules and Typical Applications List of IQ Modules The following table lists the IQ modules available when this instruction manual was printed. To obtain the most recent information or for further details, please contact EXFO.
IQ Modules and Typical Applications Typical Applications for IQ Modules Typical Applications for IQ Modules IQ-2600 IQ-2300 X X X X X Optical return loss vs. wavelength X X X X Polarization dependant loss vs. wavelength X X Isolation and crosstalk vs. wavelength X X 72 PMD Emul. IQ-9100 IQ-2600B X IQ-1100 X Insertion loss vs.
IQ Modules and Typical Applications Calibration Fiber characterization Optical Test System IQ-9100 IQ-9600 IQ-6100 IQ-5320 IQ-5240 IQ-3300 IQ-3100 IQ-2100 X X X X X X X X X X X X IQ-9600 X X X X X X IQ-9600 X X IQ-9100 X PMD Emul.
This page is intentionally left blank.
B Using the IQ-9600 Utility Module The IQ-9600 Utility Module provides a secure, standardized way of integrating components such as couplers, isolators, filters, and Bragg gratings into the IQ-200 Optical Test System. Without such a module, these passive optical elements would end up loose on your workbench. This can cause damage or affect their adjustment.
Using the IQ-9600 Utility Module Exploded View of Single-Slot Utility Module Exploded View of Single-Slot Utility Module 76 IQ-200
Using the IQ-9600 Utility Module Exploded View of Double-Slot Utility Module Exploded View of Double-Slot Utility Module Optical Test System 77
This page is intentionally left blank.
C Accessing a Remote CD-ROM Drive with the IQ-203 To access an external CD-ROM drive with your IQ-203 Control Unit, you may use either a PC accessed through a network or one connected directly to your IQ-203. Using the network is easier if you have access to it from your IQ-203, but both methods are explained in this section. Note: You may also use a portable CD-ROM drive connected to your IQ-203. In this case, refer to the drive documentation for help or instructions.
Accessing a Remote CD-ROM Drive with the IQ-203 Accessing the Remote CD-ROM from the IQ-203 Through a Network Accessing the Remote CD-ROM from the IQ-203 Through a Network IMPORTANT Some computers are protected from remote access by the network security system, even if you shared drives or folders. If you are unable to access a computer via the network, you should contact your network administrator to verify your access rights. To access the CD-ROM drive through a network, 1.
Accessing a Remote CD-ROM Drive with the IQ-203 Accessing the Remote CD-ROM from a PC Connected Directly to the IQ-203 3. Before accessing the files, make sure that both the PC and the IQ-203 are turned on (so that the PC is “visible” to the IQ-203). 4. Open the Network Neighborhood by double-clicking on the desktop icon or selecting it in Windows Explorer. The complete list of computers logged on the network should appear gradually. 5.
Accessing a Remote CD-ROM Drive with the IQ-203 Accessing the Remote CD-ROM from a PC Connected Directly to the IQ-203 2. Connect the parallel or serial cable between the IQ-203 and the PC, as shown in the following illustration: IQ-203 PC Configuring a Direct Cable Connection Protocol The Microsoft IPX/SPX-compatible protocol for Windows allows to transfer files from the host computer (the PC with the CD-ROM drive) to the guest computer (your IQ-203).
Accessing a Remote CD-ROM Drive with the IQ-203 Accessing the Remote CD-ROM from a PC Connected Directly to the IQ-203 3. Check if the IPX/SPX-compatible protocol is available in the upper list. If not, add it as follows: 3a. Click on Add..., then double-click on Protocol. 3b. In the Select Network Protocol dialog box, select Microsoft in the Manufacturer list, then IPX/SPX-compatible protocol. 3c. Click on OK to add the new protocol. 4.
Accessing a Remote CD-ROM Drive with the IQ-203 Accessing the Remote CD-ROM from a PC Connected Directly to the IQ-203 Accessing the Remote CD-ROM from the IQ-203 Before accessing the CD-ROM from your IQ-203, you need to configure each system either as a host or a guest. Typically, the host is the PC with the CD-ROM drive and the guest is your IQ-203. You must also specify the communication ports that match the physical connection. To access the CD-ROM from your IQ-203, 1.
Accessing a Remote CD-ROM Drive with the IQ-203 Troubleshooting Direct Cable Connection 2. Configure the guest using the same method as for the host. This time, you must set the Direct Cable Connection utility to Guest computer set up to connect to host. When you are done, the guest will try to establish the connection with the host as shown below. 3. If everything is set up properly, the guest should ask you for the name of the host computer.
This page is intentionally left blank.
Index Index !, at the back of the IQ-203....................... 3, 5 A AC requirements.......................................... 11 applications, typical..................................... 72 B back panel of the IQ-203 ........................................... 3 of the IQ-206 ........................................... 5 backplane connectors.................................. 39 benchtop installation................................... 13 binary code..................................................
Index ESD.............................................................. 10 exclusions, warranty .................................... 68 expansion card illustration of ISA ..................................... 7 illustration of PCI ..................................... 7 ISA ......................................................... 32 expansion unit, connection ......................... 25 extenal software.......................................... 56 F flicker ..............................................
Index customization ........................................ 45 description......................................... 1, 13 installation ............................................. 13 power on ......................................... 35, 37 product line ............................................. 1 turning off ............................................. 58 IQ-200 Software About window....................................... 57 installation description...........................
Index local ............................................................ 56 location ......................................................... 2 lockout ........................................................ 56 M maintenance defragmenting files ............................... 61 IQ-203 Control Unit ............................... 59 IQ-206 Expansion Unit ........................... 59 replacing fuses....................................... 60 mechanical specifications ............................
Index remote control GPIB ......................................................... 8 of the IQ-200 Optical Test System............ 8 RS-232 ..................................................... 8 Windows DDE .......................................... 8 Windows OLE........................................... 8 remote, status bar ....................................... 56 removing the module .................................. 40 renaming modules ......................................
