Owner manual

Pair Detective Test
Copper and xDSL Tests 91
Pair Detective
Setting Test Parameters
The Test Parameters page allows you to set Test Parameters for the Pair
Detective test.
To set the Test Parameter values:
1. From the Copper main menu Test Groups, select Pair Detective test
.
2. From the Tests menu, select Pair Detective test.
3. Tap Edit Parameters button to open the Test Parameters page.
4. Configure the Isolation Soak Time as required.
5. Tap Close to confirm and exit the page.
The page allows you to set the following parameters:
Isolation Soak Time sets a soak period of time from 0 to 59 minutes
and 59 seconds for the Pair Detective test.