Owner manual

xDSL Tests: Using the Main Menu
Copper and xDSL Tests 317
Test Configuration
 IP address is the local network IP address of the unit.
Note: If the DSL WAN has an IP address on a specific subnet (for example
192.168.x.y) and the Ethernet LAN port is enabled, configure the default
LAN IP address to a different subnet (for example 10.0.x.y) to avoid IP
communication problems.
 Subnet mask is the network address mask used to identify if the IP
address is within the same local area network.
 DHCP Server enables the dynamic host configuration protocol (DHCP)
mode for the LAN side of the connection.
To confirm your selections and exit the page:
1. Tap Save to update the current profile, or
2. Tap Save As to confirm your changes to a new Profile name, or
3. Tap Cancel to abort.