Owner manual

xDSL Application
Copper and xDSL Tests 303
Settings
 Display Modem allows you to display the modem state in the title bar
of the unit.
 Modem Power OFF:
 Immediately for when an xDSL test is completed or stopped. In
this mode, the modem is powered on when an xDSL test starts.
 Idle values power off the modem within a defined period after an
xDSL test is completed or stopped.
If your modem is MDT-AB30a, then an entry for DSLAM (Annex B) is
displayed with 3 selections:
 Annex B
 UR2
 Annex B and UR2.
Restore Factory Settings
This button allows you to Apply Factory Settings and reset the entries for
each tab under Settings, any combination, or all at once.