Owner manual

RFL Test
212 FTB-635
Setting Cable Parameters
Setting Cable Parameters
The Cable Selection page allows you to set cable parameters for an RFL
test. Settings are shared by all RFL test: 2-Wire, 4-Wire, and K-Test.
Changes done for one test are reflected in the others.
To set the cable values:
1. From the Copper main menu Test Groups, select RFL test
.
2. From the Tests menu, select RFL test.
3. Tap RFL-2-Wire, RFL-4-Wire, or RFL-K-Test to open the window.
4. Tap Select Cable button to open the Cable Selection page.
5. Edit the cable values as required.
6. Tap Close to confirm and exit the page.