Owner manual

Multimeter 2 Tests

182 FTB-635

Station Ground

The Station Ground test measures the resistance of the ground path from

the CPE (Customer Premises Equipment) to the CO (Central Office). The

test uses Tip (A), Ring (B), and Ground (Earth) leads and measures

isolation resistance between the wires and to ground. Station Ground is

also used to identify possible faults, and to measure the resistance of the

twisted pair cable.

To access the Station Ground window:

1. From the Copper main menu Test Groups, select Multimeter 2 test

2. From the Tests menu, select Station Ground to start the test.

By default, the Confirmation page opens displaying how to connect

your leads. See Hookup Diagram on page 184 for more information.