Owner manual

Multimeter Tests
Copper and xDSL Tests 167
Balance Test
Setting Test Parameters
The Test Parameters page allows you to view the parameter values for the
test.
To view the Parameter values:
1. From the Copper main menu Test Groups, select Signal test
.
2. From the Tests menu, select Balance test.
3. Tap Passive tab for which you want to set the Parameter values.
4. Tap Edit Parameter button to open the Test Parameter page.
5. Tap Close to confirm and exit the page.
The page displays the following parameters:
 Power Line Frequency displays the frequency value of the power line.
 Noise Filter displays the type of noise filter used.