Owner manual

Multimeter Tests
Copper and xDSL Tests 141
Current Test
Setting Test Parameters
The Test Parameters page allows you to set the Multimeter Current test
parameters.
To set the Parameter values:
1. From the Copper main menu Test Groups, select Multimeter test
.
2. From the Tests menu, select Current test.
3. Tap Continuous DC or Continuous AC tab for which you want to set
the Parameter values.
4. Tap Edit Parameters button to open the Test Parameters page.
5. Set the Parameter values as required.
6. Tap Close to confirm and exit the page.
The page allows you to set the following parameters:
 Selected Pair allows you to select the pair for which the resistance is
to be set.
 Termination Resistance displays the termination resistance for the
selected pair.