Owner's manual

Copper Tests: Using the Main Menu
Copper Test 67
Application Settings
 Capacitance Measurement is either 3 Terminal or 2 Terminal. The
latter method measures the capacitance across the 2 terminals
specified (either T-R, T-G, R-G or A-B, A-E, B-E), whereas the 3 Terminal
method measures the capacitance across the 2 terminals specified,
and shorts the remaining (or unspecified) terminal to G/E.
Note: In order to correctly determine cable length by using the capacitance
measurement, the Cable Book must contain both 3/2 Terminal values.
 Test Startup Mode lists the test startup type:
 Auto (default) automatically starts a test when you select the
respective icon from the test sub-menu.
 Manual requires that you tap the Start button on the Main Menu to
start a test.
 Result File Storage Location allows you to select where to save your
results: to a USB or the internal memory.
 Report Format is HTML, MHTML, XML, or PDF as the generated report
format.
 Prompt To Save Results allows you to enable popup confirmation
messages before leaving a test and not saving results, by checking the
box.
 Show Connection Diagram On Test Startup allows you to enable the
hookup diagram upon startup by checking the boxes of the following
tests:
 Xtalk
 Station Ground
 NEXT