User Manual

FTB-1v2/FTB-1 Pro Platform
SPECIFICATIONS
a
FTB-1v2 FTB-1 PRO
Mainframe Dual-core processor/4 GB RAM/Windows 10 Quad-core processor/4 GB RAM/Windows 10
Display Multitouch, wide-screen, color, 1280 x 800 TFT 203 mm (8 in) Multitouch wide-screen, color, 1280 x 800 TFT 203 mm (8 in)
Interfaces
RJ45 LAN 10/100/1000 Mbit/s
Two USB 2.0 ports
One USB 3.0 port
Micro SD card slot
3.5 mm headset/microphone port
RJ45 LAN 10/100/1000 Mbit/s
Two USB 2.0 ports
One USB 3.0 port
Micro SD card slot
3.5 mm headset/microphone port
Storage 64 GB internal memory (flash) 128 GB internal memory (flash)
Battery Rechargeable Li-ion smart battery Rechargeable Li-ion smart battery
Power supply AC/DC adapter, input:
100 – 240 V; 50/60 Hz; 2.5 A max,
output:
24 V; 3.75 A
AC/DC adapter, input:
100 – 240 V; 50/60 Hz; 2.5 A max,
output:
24 V; 3.75 A
With high-power dual carrier
AC/DC adapter, input:
100 – 240 V; 50/60 Hz; 4.0 A max,
output:
24 V; 8.33 A
GENERAL SPECIFICATIONS
Size (H x W x D)
With single-depth module back / With single carrier
With double-depth module back / With dual carrier
With high-power dual carrier
210 mm x 254 mm x 66 mm (8 ¼ in x 10 in x 2 ⅝ in)
210 mm x 254 mm x 96 mm (8 ¼ in x 10 in x 3
13
/
16
in)
210 mm x 254 mm x 122 mm (8 ¼ in x 10 in x 4 ¾ in)
Weight (with battery)
c
With single carrier
With dual carrier
With high-power dual carrier
1.5 kg (3.3 lb)
2.0 kg (4.3 lb)
2.4 kg (5.2 lb)
3.2 kg (7.1 lb)
Temperature Operation
Storage
0 °C to 50 °C (32 °F to 122 °F)
–40 °C to 70 °C (–40 °F to 158 °F)
b
Relative humidity 0 % to 95 % non-condensing
VISUAL FAULT LOCATOR (VFL) (OPTIONAL)
Laser, 650 nm ± 10 nm
CW/Modulate 1 Hz
Typical P
out
in 62.5/125 µm: –1.5 dBm (0.7 mW)
Laser safety: Class 2
BUILT-IN POWER METER SPECIFICATIONS (GEX) (OPTIONAL)
d
Calibrated wavelengths (nm) 850, 1300, 1310, 1490, 1550, 1625, 1650
Optional CWDM calibrated
wavelengths (nm)
1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490,
1510, 1530, 1550, 1570, 1590, 1610, 1383 and 1625
Power range (dBm) Typical 27 to –50
Uncertainty (%)
e, f
±5 % ± 10 nW
Display resolution (dB)
0.01 = max to –40 dBm
0.1 = –40 dBm to –50 dBm
Notes
a. All specifications valid at 23 °C (73 °F).
b. –20 °C to 60 °C (–4 °F to 140 °F) with the battery, and –20 °C to 45 °C (–4 °F to 113 °F) for long-term storage.
c. Platform with batteries and without module.
d. At 23 °C ± 1 °C, 1550 nm and FC connector. With modules in idle mode. Battery-operated after warm-up.
e. Typical.
f. At calibration conditions.
LASER SAFETY
The test modules that you
use with your unit may have
different laser classes. Refer to
the module’s documentation
for exact information.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
IEC 60825-1:2007 21 CFR 1040.10
: 650 ±10 nm
P
out
maximum < 2mW
λ
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com