User Guide FLS-240 Pocket Pal Visual Fault Locator
Copyright © 2003–2013 EXFO Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, be it electronically, mechanically, or by any other means such as photocopying, recording or otherwise, without the prior written permission of EXFO Inc. (EXFO). Information provided by EXFO is believed to be accurate and reliable.
Contents Certification Information ....................................................................................................... iv 1 Introducing the FLS-240 Pocket Pal Visual Fault Locator ........................... 1 Main Features .........................................................................................................................1 Conventions ............................................................................................................................
Certification Information Certification Information North America Regulatory Statement This unit was certified by an agency approved in both Canada and the United States of America. It has been evaluated according to applicable North American approved standards for product safety for use in Canada and the United States. Electronic test and measurement equipment is exempt from FCC part 15, subpart B compliance in the United States of America and from ICES-003 compliance in Canada. However, EXFO Inc.
Certification Information European Community Declaration of Conformity DECLARATION OF CONFORMITY Application of Council Directive(s): 2004/108/EC – The EMC Directive 93/68/EEC – CE Marking And their amendments Manufacturer’s Name and Address: EXFO Inc. 400 Godin Avenue Quebec City, Quebec G1M 2K2 CANADA Tel.: +1 418 683-0211 Equipment Type/Environment: Trade Name/Model No.
1 Introducing the FLS-240 Pocket Pal Visual Fault Locator Main Features The Pocket Pal is a visual fault locator that emits a pulsating or continuous (CW) bright red laser signal, often visible through the patchcord jacket, at the exact fault location, in both singlemode and multimode fibers.
Introducing the FLS-240 Pocket Pal Visual Fault Locator Main Features Your Pocket Pal can be used in different ways, including the following: Detecting breaks in OTDR Detecting defective connectors Highlighting sharp bends Ensuring end-to-end fiber Optimizing mechanical/fusion Detecting major scratches on dead zone where losses occur splices 2 identification in multifiber cables connector surfaces FLS-240
Introducing the FLS-240 Pocket Pal Visual Fault Locator Conventions Conventions Before using the product described in this guide, you should understand the following conventions: WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not proceed unless you understand and meet the required conditions. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
2 Safety Information WARNING Do not install or terminate fibers while a light source is active. Never look directly into a live fiber and ensure that your eyes are protected at all times. WARNING The use of controls, adjustments and procedures other than those specified herein may result in exposure to hazardous situations or impair the protection provided by this unit.
Safety Information Your instrument is a Class 2M laser product in compliance with standards IEC 60825-1: 2007 and 21 CFR 1040.10, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Laser radiation is emitted at the output port. Natural aversion responses, including the blink reflex, usually provide adequate eye protection. However, viewing the output may be more hazardous if you use optics within the beam.
3 Operating Your Pocket Pal 3 1 4 2 To activate the Pocket Pal’s VFL: 1. Remove the protective cap. 2. Connect the fiber you want to use to the adapter. Ensure that the connector is inserted all the way into the adapter. 3. Press the on/off button to turn the VFL laser on in pulsating mode. 4. If you want a continuous signal, press the red-circled button on the safety sticker. Press it again to return to pulsating signal.
4 Maintenance and Troubleshooting Cleaning the Connector Adapter To prevent dust and dirt from entering the connector, always replace the protective cap on the adapter when not in use. Clean the adapter using a lint-free swab dipped in isopropyl alcohol (98 % pure or more). Then, blow-dry with compressed air. Replacing Batteries Your Pocket Pal requires two AAA-size batteries to function. To replace batteries: 1. Unscrew the push button to open the battery compartment. 2.
Maintenance and Troubleshooting Contacting the Technical Support Group Contacting the Technical Support Group To obtain after-sales service or technical support for this product, contact EXFO at one of the following numbers. The Technical Support Group is available to take your calls from Monday to Friday, 8:00 a.m. to 7:00 p.m. (Eastern Time in North America). Technical Support Group 400 Godin Avenue Quebec (Quebec) G1M 2K2 CANADA 1 866 683-0155 (USA and Canada) Tel.
Maintenance and Troubleshooting Recycling and Disposal (Applies to European Union Only) Recycling and Disposal (Applies to European Union Only) For complete recycling/disposal information as per European Directive WEEE 2012/19/UE, visit the EXFO Web site at www.exfo.com/recycle.
5 Warranty General Information EXFO Inc. (EXFO) warrants this equipment against defects in material and workmanship for a period of one year from the date of original shipment. EXFO also warrants that this equipment will meet applicable specifications under normal use.
Warranty Liability Liability EXFO shall not be liable for damages resulting from the use of the product, nor shall be responsible for any failure in the performance of other items to which the product is connected or the operation of any system of which the product may be a part. EXFO shall not be liable for damages resulting from improper usage or unauthorized modification of the product, its accompanying accessories and software.
Warranty Exclusions Exclusions EXFO reserves the right to make changes in the design or construction of any of its products at any time without incurring obligation to make any changes whatsoever on units purchased. Accessories, including but not limited to fuses, pilot lamps, batteries and universal interfaces (EUI) used with EXFO products are not covered by this warranty.
Warranty Service and Repairs Service and Repairs EXFO commits to providing product service and repair for five years following the date of purchase. To send any equipment for service or repair: 1. Call one of EXFO’s authorized service centers (see EXFO Service Centers Worldwide on page 17). Support personnel will determine if the equipment requires service, repair, or calibration. 2.
Warranty EXFO Service Centers Worldwide EXFO Service Centers Worldwide If your product requires servicing, contact your nearest authorized service center. EXFO Headquarters Service Center 400 Godin Avenue Quebec (Quebec) G1M 2K2 CANADA EXFO Europe Service Center Winchester House, School Lane Chandlers Ford, Hampshire S053 4DG ENGLAND EXFO Telecom Equipment (Shenzhen) Ltd. 3rd Floor, Building 10, Yu Sheng Industrial Park (Gu Shu Crossing), No.
A Technical Specifications IMPORTANT The following technical specifications can change without notice. The information presented in this section is provided as a reference only. To obtain this product’s most recent technical specifications, visit the EXFO Web site at www.exfo.com.
NOTICE 抩⛙ CHINESE REGULATION ON RESTRICTION OF HAZARDOUS SUBSTANCES ₼⦌␂ℝ☀⹂䓸德棟Ⓟ䤓屓⸩ NAMES AND CONTENTS OF THE TOXIC OR HAZARDOUS SUBSTANCES OR ELEMENTS CONTAINED IN THIS EXFO PRODUCT ▔⚺⦷㦻 EXFO ℶ❐₼䤓㦘㹡㦘⹂䓸德㒥⏒侯䤓⚜䱿✛⚺摞 O X Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006 嫷䯉年㦘㹡㦘⹂䓸德⦷年捷ↅ㓏㦘⧖德㧟㠨₼䤓⚺摞⧖⦷ SJ/T11363-2006 㪖屓⸩䤓 棟摞尐㻑ⅴₚᇭ Indicates that this toxic or hazardous substance contained in at least one of the
MARKING REQUIREMENTS 㪖㽷尐㻑 Product Environmental protection use period (years) Logo ℶ❐ 䘾⬒≬㔳∎䞷㦮棟 ( ) 㪖㉦ This Exfo product 㦻 EXFO ℶ❐ Batterya 䟄㻯 a a. If applicable.
P/N: 1065102 www.EXFO.com · info@exfo.com CORPORATE HEADQUARTERS 400 Godin Avenue Quebec (Quebec) G1M 2K2 CANADA Tel.: 1 418 683-0211 · Fax: 1 418 683-2170 EXFO AMERICA 3400 Waterview Parkway Suite 100 Richardson, TX 75080 USA Tel.: 1 972-761-927 · Fax: 1 972-761-9067 EXFO EUROPE Winchester House, School Lane Chandlers Ford, Hampshire S053 4DG ENGLAND Tel.: +44 2380 246 800 · Fax: +44 2380 246 801 EXFO ASIA-PACIFIC 100 Beach Road, #25-01/03 Shaw Tower SINGAPORE 189702 Tel.
