Software Owner manual

Working with PMD Files

92 FastReporter

Changing Fiber Length

If you are working with .pmd or .pmdb files, you can change the fiber

length to obtain more precision in your analysis.

To change the fiber length:

1. Open a PMD measurement file.

2. Select the measurement for which you want to change the fiber length.

You can select more than one using the Ctrl and Shift keys.

3. In the main window, select the Summary tab.

4. Locate the fiber length value under Test Settings and modify it as

needed.

Note: If your file is in .cdpmd format, the fiber length was measured

automatically during the measurement and cannot be edited.