Software Owner manual

Working with CD Files

Data Post-Processing Software 87

Changing the Fiber Length

If you are working with an .exfocd format file, you can change the fiber

length to obtain more precision in your analysis.

To change the fiber length:

1. Open a CD measurement file.

2. Select the measurement for which you want to change the fiber length.

You can select more than one using the Ctrl and Shift keys.

3. In the main window, select the Summary tab.

4. In the Fiber Length box, enter a new value for the analysis.

Note: If your file is in .cdpmd format, the fiber length was measured

automatically during the measurement and cannot be edited.