Software Owner manual

Working with iOLM files
126 FastReporter
Managing Element
To add element:
1. Open an iOLM file.
2. Select the existing element where you want to add the new element,
right click on the Link View, and select Add Element.
OR
Select the existing element where you want to add the new element,
from Measurement menu select iOLM, and Add Element.
3. In the New Element dialog, configure the Element Details.
3a. You can add the new element after or before the selected
element. The position can be selected as required in the Location
field.
3b. Select type of the new element as required.
4. Press OK to apply the changes or Cancel to discard it.
Note: If an element is added, a ‘*’ sign is displayed at the Position and Type
column.