User Manual

VF / DSL Cable Qualifier
298
J.6.3 New Connection Menu
To set up a connection between the PC to the CableSHARK, click on New Connection on the menu bar as
shown below.
FIGURE J.6.3A – SELECTING DIRECT CONNECTION FROM THE NEW CONNECTION MENU
Next, click on Setup Connection on the pull-down menu that is displayed. The “Setup Connection
Through…” menu shown below is displalyed.
FIGURE J.6.3B – THE SETUP DIRECT CONNECTION DIALOG
The radio buttons to the left-hand side of the menu allow the user to select from Setup Connection
Through…. a COM port, an Ethernet port, or connection through a MODEM.