Specifications

CLEANING
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents. Be
careful not get excessive moisture on the display panel as this might cause an electrical hazard or electronics
to fail.
Please keep the treadmill, especially, the console, out of direct sunlight to prevent screen damage.
STORAGE
Store the treadmill in a clean and dry environment. Ensure the master power switch is off and is in the off
position and the power plug is un-plugged from the electrical wall outlet.
TROUBLESHOOTING GUIDE
BELT ADJUSTMENT AND LUBRICATION
Belt Adjustment:
The belt is adjusted at the factory; it may come loose during transportation and/or from use. After prolong use
of the treadmill, the belt will stretch out. If the belt is shifting to the left, turn on the main power switch of
17
Apply silicone lubricant.
Adjust belt tension.
Adjust belt tension.
Put the power plug into the electrical wall
outlet.
Install the safety tether key.
Reset or have an electrician replace the
breaker in home.
Wait five minutes and then press the switch
back in.
Center the belt.
Problem
Treadmill will not
start.
Belt slips.
Belt is off
centered.
Potential Causes
Not plugged in.
Safety tether key not connected.
House circuit breaker tripped.
Treadmill circuit breaker tripped.
Belt not tight enough.
Not enough lubrication applied onto
the running deck.
Belt is too tight.
Running belt tension not even
across the rear roller.
Corrections
Belt hesitates
When stepped on.